10-01-2019 07:24 AM - last edited on 03-06-2024 07:37 PM by ROGBot
10-01-2019 08:43 AM
10-01-2019 09:08 AM
ThrashZone wrote:
Hi,
Some of the newer hwinfo versions read blk/ pci-e & bus clocks weird so go beck to say 6.08.3830 and see what it shows
Make sure cpu strap is on 100 not 125 or auto do the same for memory black
Your cache is way too high 30-32 are max and even 32 might need a manual voltage of 1.18v and still not stable usually only good for benchmarks not 24/ 7 usage.
Also unless you go manual voltage, adaptive or even offset will be ignored at ehatever you set these to be
Some and even I have used negative offset but it's unreliable on cold start up or even restart to bsod as overclock failed.
10-01-2019 09:22 AM
10-01-2019 09:30 AM
10-01-2019 09:33 AM
10-01-2019 09:37 AM
ThrashZone wrote:
Hi,
Bios shots aren't necessary
Just install older hwinfo
Right click the hwinfo icon on action center and select settings
Safety section Uncheck Periodic poling on the bottom left/ save.
10-01-2019 09:35 AM
10-01-2019 09:43 AM
10-01-2019 09:57 AM