Results 1 to 10 of 29

Threaded View

  1. #1
    ROG Enthusiast Array Brockmonster PC Specs
    Brockmonster PC Specs
    MotherboardRampage VI Extreme Encore
    ProcessorI9 10980XE
    Memory (part number)G.SKILL F4-3200C14Q-32GTZ Trident Z Series 32 GB DDR4 3200 MHz
    Graphics Card #1EVGA Hydro Copper GTX 2080TI
    Graphics Card #2EVGA Hydro Copper GTX 2080TI
    Sound CardCreative Sound Blaster ZxR PCI-Express
    MonitorSamsung 32"
    Storage #1Samsung 970 PRO Polaris 512GB M.2 2280 PCI-e 3.0 x4 NVMe Solid State Drive
    Storage #2Samsung 970 PRO Polaris 512GB M.2 2280 PCI-e 3.0 x4 NVMe Solid State Drive
    CPU CoolerEK Water Blocks EK Encore Full coverage
    CasePhanteks Enthoo Elite Super Tower Case - Black
    Power SupplyEVGA 1600w
    Keyboard Corsair CH-9127014-UK K95 Platinum RGB Rapid Fire Cherry MX Speed Multi-Colour Backlit Mechanical Ga
    Mouse Corsair Gaming CH-9302111-EU Glaive RGB Multi-Colour Backlit Performance 16000 DPI
    OS Windows 10 X64
    Network RouterASUS RT-AC3200 Tri-Band Wireless Gigabit Router with USB 3.0
    Accessory #1 2 x 480mm push pull 1 x 240mm push pull
    Accessory #2 2 Custom loops, 2 x D5 Pumps, Solid Brass nickel plated tube
    Accessory #3 6 x Corsair XTI 480gb SSD`s, Aquaero 6 XT, 3 x Poweradjust 3 USB, ultra version, 2x Flow sensor hig

    Join Date
    Aug 2015
    Reputation
    11
    Posts
    61

    Rampage VI Extreme bios 2002 issue

    Well I took the plunge and flashed to bios 2002 from 1503, 1704 and 1902 plagued me with random system lockups so I was hoping that 2002 resolved the issue.

    How wrong was I well saying that all was good for 10 minutes then a random system lockup. I have tried setting the memory settings manually with no joy.
    XMP is a no go zone and manually setting everything was the same. After changing settings for most of the afternoon I noticed that when the memory voltage was on auto it was it was ramping it up to 1.500v ?? It should be 1.350v so I set it manually and I could not get the system to boot for love nor money with the memory at 3200Mhz and again everything was in manually.

    At this point I was giving up the will to live so I left the memory voltage on auto to get it to boot in to windows and ran some bench test with AID64 and all was good.
    I will add that prior to all of this I had ran Memtest86 using bios 1503 and all 4 tests completed with no errors.


    After using the pc for about 30 minutes my screen went blank ?? after moving the mouse around the screen my short cuts came back as the curser moved over them?? so I refreshed the screen and everything was back. I put this down to a memory issue and put the memory back to default settings along with the voltage on auto which was showing 1.200v which are correct for default.
    one other test that I did was I went in to tweakers paradise to the bottom of the page and changed the DRAM eventual voltage to 1.350v for A,B,C.D along with the memory settings put in manually, this then showed the voltage in extreme tweaker at 1.350 when it was set to auto and not the 1.500v showing before but again I was unable to get the system to boot


    My memory is
    G.SKILL F4-3200C14Q-32GTZR Trident Z RGB Series 32 GB (8 GB x 4) DDR4 3200 MHz PC4-25600 CL14 Dual Channel Memory Kit which is on the QVL list.

    I have switched back to bios 1 which is 1503 where I have no issue with voltages or XMP, any help guys because I'm completely stumped
    Phanteks Enthoo Elite, Asus Rampage VI Extreme Encore, Intel I9 10980XE, G.SKILL F4-3200C14Q-32GTZ Trident Z Series @3200, 2 x EVGA Hydro Copper GTX 2080TI, Creative Sound Blaster ZxR PCI-Express Sound Card, EK ASUS ROG R6EE RGB Monoblock, 2 x Samsung 970 Pro 512GB Direct to CPU, Aqua Computer kryoM.2 with Samsung 960 Pro 512GB PCIe slot 4, 4 x Corsair XTI 480GB SSD, Aqua Computer Aquaero 6XT, 2x Aqua Computer D5 NEXT pump with Aquabus interface, 2 x XSPC 480mm Rads, EVGA 1600w PSU and more

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •