ArmoryCrate UPDATE aio is back in control 10/14/2019

[darkspr1te]

Heres your fix for All armoury crate and Aura sync issues.

Armoury crate/aura fix by darkspr1te


darkspr1te

[Cucumber2018]

Hello, Armory crate for some reason does not want to control the backlight of my motherboard. Although the program sees the board. How to fix?

[Laelys]

After a reboot my armoury crate don't see my harware...incredible ....
Very stupid dev team....

[Grischkow]

Thanks. I all ready test that today and send the report very early today with other points of interest

ok i updatet fw to 0204. niw its fine. BUT now its blinked every 3-4 sek

[MrAgapiGC]

ok i updatet fw to 0204. niw its fine. BUT now its blinked every 3-4 sek

is ok. the idea of that is to avoid the burn in effect. that was detected. is not blink is the 3 4 sec, if more notable on hardware monitor since the time for each reading is 4seg and have that impression. I send a note to Dev to reduce the timing in millisecond. also the gif is faster so it can be seeing in that time frame.

and also fix the 180..

[Crasje]

you need a technical university degree to make any sense of the first message.... Djesus, how complex can you make things?

[Grischkow]

is ok. the idea of that is to avoid the burn in effect. that was detected. is not blink is the 3 4 sec, if more notable on hardware monitor since the time for each reading is 4seg and have that impression. I send a note to Dev to reduce the timing in millisecond. also the gif is faster so it can be seeing in that time frame.

and also fix the 180..

love you!

[Darthpibe]

Got a Problem with Ryujin 360, sometimes on windows startup oled screen stays on logo image and doesn't feature the temp as I configure before turning off the PC, and other times after some hours of use the Ryujin stucks at a fan speed and a temp measure that i have to open armoury crate and establish the default settings of Ryujin so it can measure everything well again, how can i fix this?

FYI: I used Revo Uninstaller to delete some things on the registry after unistalling aura and armoury crate, but I reinstalled Armoury crate after this, I saw this post after done all of this.

[Nino_1973]

new bugs armory create

[MrAgapiGC]

Got a Problem with Ryujin 360, sometimes on windows startup oled screen stays on logo image and doesn't feature the temp as I configure before turning off the PC, and other times after some hours of use the Ryujin stucks at a fan speed and a temp measure that i have to open armoury crate and establish the default settings of Ryujin so it can measure everything well again, how can i fix this?

FYI: I used Revo Uninstaller to delete some things on the registry after uninstalling aura and armory crate, but I reinstalled the Armoury crate after this, I saw this post after done all of this.

We are working on that and testing.

my friends in arms came that a probable memory leak of some sorry, a bios issues since IF the XMP is disable, does not frooze. I even I am using a not realease AIOHAL. i am testing these 24h and getting all sides to send to developers. is RAMDOM z490 and z390 is ramdom on diferent scenarios. in you case also is diferent. I got fix not frooze for 11h. but on xmp disable ... well there it is. on any way, still, a windows issue that need to be patch and maybe a new firmware. also is a mix. I am wokring hard so they can have all data posible

As soon i have something I will post on the main root.

NOTE. DO NOT USE ANY CLEANERS.