ArmoryCrate UPDATE aio is back in control 10/14/2019

[MrAgapiGC]

Still have a "problem", if I change something in the OLED display (eg hardware monitoring or other image, logo, etc.), then it will be reset after restarting of PC (on the initial gift-image with Asus logo). Only when I start Crate and go into the menu of OLED, it will be "current" again.

If Armory Crate supports the function with 180 ° (doesnt work at the moment - Freezes), can I assume that I can install the cooler inverted (rotated by 180 °)?

That has being reported. It is normal, for the moment, restarting the computer default functions is use until the crate loads. And if it do not load on boot, there is the same issue that i use to have before the update.

The 180degree is out. Do not use it. i report that all ready the only way to fix that is unplug the psu power and disconnect the aio (sata an usb) for 15 minutes. it try all scenarios.

I i will take notes on these. Most issues where fix on clean install. and some other like your where fix on the yesterday update.

[Grischkow]

It is possible to install the cooler of ryujin inverted (180°)?

[Re@per]

It is possible to install the cooler of ryujin inverted (180°)?

normally yes but don’t know if the settings will work . There is a option for turning the screen but some people have problems with it*

[Antog89]

ok, now all seem to work. i made a recap.

Fresh install of Windows 10 PRO 1903 without internet.
In bios CSM disabled and Armoury enabled.
At first boot i ONLY install armoury and link ethernet when asked.
The armoury take a lot of time to configure, when finished i reboot.
install chipset, ME interface, Rapid storage, reboot.
update all UWP app (armoury too).
trough armoury update all SDK, and works fine.
i finish to install all oem driver (with various reboot).

At this time ALL works great (fan curve, aura sync, all update), and i have all driver installed.
But i do not linked all my peripherals. (i've used normal old usb mouse).

For my mouse is an off topic (is corsair), but all works fine with iCue.
For My case (Helios) is an off topic too, i'm sure is an hardware problem. or an incompatiblity with my bios or motherboard. it NEVER worked with NO software. a bit of bad luck.

For my keyboard Claymore i have good news!
at this link it possible to download all aura SDK.
https://www.asus.com/campaign/aura/fl/SDK.html
in this packet there is an exe called "AacKbSetup.exe". i've install it (ONLY this) and reboot. now armoury crate work like a charm with my keyboard!! wonderfull effect! i suggest to DO NOT install this with other rog keyboard!! the DLL seems to be dedicate to claymore!

the aura terminal is used internally so i do not need of halo software and works fine with armoury crate.


at this moment, ALL software, ALL hardware and ALL sync works perfectly.

the only thing, is the sdk of my motherboard. i still remain to 1.01.04 but works fine and the update 1.01.08 is missing. if i check update , nothing pop-up.
i don't care, if all works i'm happy.

i can continue with all the rest of installation (like steam, finally)

EDIT:
just for saying, i have the last BIOS 1302.

[Grischkow]

ok, now all seem to work. i made a recap.

Fresh install of Windows 10 PRO 1903 without internet.
In bios CSM disabled and Armoury enabled.
At first boot i ONLY install armoury and link ethernet when asked.
The armoury take a lot of time to configure, when finished i reboot.
install chipset, ME interface, Rapid storage, reboot.
update all UWP app (armoury too).
trough armoury update all SDK, and works fine.
i finish to install all oem driver (with various reboot).

At this time ALL works great (fan curve, aura sync, all update), and i have all driver installed.
But i do not linked all my peripherals. (i've used normal old usb mouse).

For my mouse is an off topic (is corsair), but all works fine with iCue.
For My case (Helios) is an off topic too, i'm sure is an hardware problem. or an incompatiblity with my bios or motherboard. it NEVER worked with NO software. a bit of bad luck.

For my keyboard Claymore i have good news!
at this link it possible to download all aura SDK.
https://www.asus.com/campaign/aura/fl/SDK.html
in this packet there is an exe called "AacKbSetup.exe". i've install it (ONLY this) and reboot. now armoury crate work like a charm with my keyboard!! wonderfull effect! i suggest to DO NOT install this with other rog keyboard!! the DLL seems to be dedicate to claymore!

the aura terminal is used internally so i do not need of halo software and works fine with armoury crate.


at this moment, ALL software, ALL hardware and ALL sync works perfectly.

the only thing, is the sdk of my motherboard. i still remain to 1.01.04 but works fine and the update 1.01.08 is missing. if i check update , nothing pop-up.
i don't care, if all works i'm happy.

i can continue with all the rest of installation (like steam, finally)

EDIT:
just for saying, i have the last BIOS 1302.

NICE! I will test it today with claymore! Thx you

[zoli_10]

Works fine after the latest update on 14th of OCT - for Ryujin 360 speed control.

Well i say fine, but it still has a lot of bugs, and cant control the PUMP still, but at least the fans are controllable.

[Johnnie]

Dear Mates,

Really all disappointing!!! So damn expensive all components I have and cannot use it all the way! Please, im begging You dear Asus, help!!!





Best regards,
John

[MrAgapiGC]

ok, now all seem to work. i made a recap.

Fresh install of Windows 10 PRO 1903 without internet.
In bios CSM disabled and Armoury enabled.
At first boot i ONLY install armoury and link ethernet when asked.
The armoury take a lot of time to configure, when finished i reboot.
install chipset, ME interface, Rapid storage, reboot.
update all UWP app (armoury too).
trough armoury update all SDK, and works fine.
i finish to install all oem driver (with various reboot).

At this time ALL works great (fan curve, aura sync, all update), and i have all driver installed.
But i do not linked all my peripherals. (i've used normal old usb mouse).

For my mouse is an off topic (is corsair), but all works fine with iCue.
For My case (Helios) is an off topic too, i'm sure is an hardware problem. or an incompatiblity with my bios or motherboard. it NEVER worked with NO software. a bit of bad luck.

For my keyboard Claymore i have good news!
at this link it possible to download all aura SDK.
https://www.asus.com/campaign/aura/fl/SDK.html
in this packet there is an exe called "AacKbSetup.exe". i've install it (ONLY this) and reboot. now armoury crate work like a charm with my keyboard!! wonderfull effect! i suggest to DO NOT install this with other rog keyboard!! the DLL seems to be dedicate to claymore!

the aura terminal is used internally so i do not need of halo software and works fine with armoury crate.


at this moment, ALL software, ALL hardware and ALL sync works perfectly.

the only thing, is the sdk of my motherboard. i still remain to 1.01.04 but works fine and the update 1.01.08 is missing. if i check update , nothing pop-up.
i don't care, if all works i'm happy.

i can continue with all the rest of installation (like steam, finally)

EDIT:
just for saying, i have the last BIOS 1302.

We all ready test that on some point also. there will be some issues down the road. place a screen shot of the armory crate where aura and menu if the claymore appear. IF keyboard or just claymore or a keyboard logo appears.

As far, the sdk is a developer tool. and i was told these and the spatha will not make the compatibility list. Also 3 days ago, since flare was out from RogArmory2 the use of crate is a most. On install, mouse appear on Crate (spatha) but just the logo and the word mouse. I will check with my friend and see how he is going.

[Johnnie]

Dear Mates,

Is there any news? Who has Rampage VI Extreme Omega, is there all okay? Anyone?
I setup all as MrAgapiGC (Thank You very much!) says. CSM disabled and UEFI boot only. Bios latest 806. Nothing of this helps. And now, motherboard OLED shows that i have only 3.000 GHz frequency CPU. But in BIOS i setup All Core Sync and multiplier x40. Also ROG CPU-Z 1.90 shows that i has multiplier only x30. I dont know what to do.

Best regards,
John

[Antog89]

We all ready test that on some point also. there will be some issues down the road. place a screen shot of the armory crate where aura and menu if the claymore appear. IF keyboard or just claymore or a keyboard logo appears.

As far, the sdk is a developer tool. and i was told these and the spatha will not make the compatibility list. Also 3 days ago, since flare was out from RogArmory2 the use of crate is a most. On install, mouse appear on Crate (spatha) but just the logo and the word mouse. I will check with my friend and see how he is going.

ok, armoury crate show just "keyboard" indeed ("Tastiera" in italian, without any other detail of model. in my opinion is a decent workaround, i mean... it works really well.



yeah there is some bug yet like the profile XML of ryujin that seem corrupted and require a reboot, or the aura sync that seem don't work and require reboot, but the principle functions work at 90% well for me, with my spec.
For ryujin actually the control of AIO Pump is missing (is present in asus AI suite III). it work always at about 2700rpm

EDIT:
anyway, with Rog Armory II it possible to manage other RGB effect for single key, macro, etc...