Hi guys need a bit of help with a OC, I have manually found the voltage where my oc is stable at 4.7ghzt yet when I use adaptive voltage it increases the voltage I have followed and tried multiple Google articles and no avail. My voltage required for a 4.7ghz oc is 1.248 with AVX I run prime 95 it's fine but soon as I play with adaptive voltage or set it to auto the voltage is shown as 1.274v and it's like adaptive is ignoring my voltage input. The strange thing here is running prime 95 on a manual set voltage no workers fail but soon as I use adaptive or auto and the voltage shown is only slightly higher by 0.026v 1 or 2 workers start failing what is it that I am doing wrong. Thank you