Page 1 of 8 1 2 3 ... LastLast
Results 1 to 10 of 86

Hybrid View

  1. #1
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    Bombproof Builders Desk.....Build

    Ok so I have been planning on building a new desk ever since me and my brother in law built me a new PC work bench (Pictured below)



    Using Just 2x4's and some melamine we built a super sturdy bench for about $120 and I couldnt be happier with it. Since then I have been looking at my current work/play station with a little bit of disgust, its made up out of 3 seperate desks none of which are exactly the same height. Further more due to my affinity for eyefinity and large PC cases I am finding that my little work nook is getting more and more cramped and cluttered. Heres a pic of the space I am working with please excuse the mess.





    So the new plan is to gut the whole thing and create a desk that wraps around the entire area Like so (sorry for the small paint image)



    Then I am going to wrap the top of the desk with custom printed Mechwarrior themed vinyl using my wide format digital printer. So on to the construction phase. I have to give a ton of thanks to the two guys working with me (these or their online handles), Talster91 aka my old room mate and Dreyco Valentin who is my brother in law. With out them theres no way I could get these kind of projects done with the quality and speed we do together, We are also building Talster91 a new desk for the gaming rig I helped him build. So here is the start today, we are using birch plywood for the top and kiln dried 2x4's for the frame, using a overlapping design to interlock the tops and frames together. So today we ripped the plywood and tomorrow we will build the frames.



    Dreyco



    Talster91


    Also this arrived today



    Day 2

    Ok Most of today is dedicated to Talsters desk build Which is specced to be L60xW30 with a 30 inch height


    For legs on both desks are a L shape made of two 2x4's screwed together gives great stuctural support.


  2. #2
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    Next up us cutting and laying out the lower braces and the leg spacing.





    When building your own desk its important to have the imagination and vision to know what you want as Talster demonstrates



    Next up is setting up the top box




    Next up is checking to see if the frame is square.



    Damn its a inch out but dont worry theres a easy way to fix that!

    Tie Downs are like duct tape for woodworking




    Next up is cutting the top to length, we will be anchoring to the top to keep the desk in square.



  3. #3
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    For everything to look good he mapped out his screws and is pre drilling then using a cone bit for pre seating the heads.




    Next up is taking a router to all the edges for that smoothed finished look.




    Ready for sanding and staining



    Also these showed up on my door woo!



    Throw some stain on and thats all for today


  4. #4
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    Day 3

    I was down a day more than I expected ( the multi-player demo of Mass Effect 3 may have had something to do with that ) Ok so first off I want to thank Dreyco again without him this desk would not have happened and the next stage wouldn't even be possible. Ok down to business, to start with I happened to snag a great deal on a 720p projector which I had been wanting for the launch of ME3 for Xbox 360 (yes I play it on console thats where all my saved games are) so we will be starting there. Parts involved are

    Optoma 536 720p 2700 lumen projector

    Elite Screen 100 inch 16:9 manual screen

    Ceiling Mount For projector

    Plan is to recess the screen into the ceiling and then re-route the surround sound and video/console equipment.

    First off got to get all electronics out of the room as sheetrock dust is not good for electronics.




    Next up is measuring the screen housing and cutting the hole




    That done we just put some hooks in the floorboards and time to try a test pull


  5. #5
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    Threw the projector up and time to see how it looks



    Ok that done on to the desk, Cleared out all of the old stuff



    With a blank slate its time to get to work



    The key to building a desk with lumber like this is to never pre cut, make each cut to the specific spot so its always spot on and you can compensate for imperfections in the wood.



    With the first section built (it will be the only complete section with 4 legs each section after this with be missing at least one leg to create a open front for chair and legroom)





    Now we are joining the crossmember with a T bracket



    We are double butting our legs for extra support



    To limit flex we added a cross support.


  6. #6
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    Frame is complete



    Cutting the tops to fit.



    Test fitting the tops and monitors







    Next up we mark out the monitor slots and our wire slots





    The mounts slide into the slots and get 4 lag bolts into the 2x4 below






  7. #7
    Insane Viking Power Array frisianbear2002's Avatar
    Join Date
    Feb 2012
    Reputation
    16
    Posts
    470

    Looking great till so far.
    l Asus Rampage 4 Extreme l intel 3930X@ 4800Mhz (1.45volt) 24/7 l Asus matrix GTX 580 l
    16GB Team Xtreem DDR3 PC3-20800 2600MHz (11-11-11-28-1)
    l Coolermaster Silentpro 1000w PSU l Revodrive3 ssd l WD Raptor 150Gb (10000rpm) l Corsair H100 wc with 4 Cougar Vortex fans l CM HAF 932 Avanced case l Acer X243H 24'' l Asus RT N66U Dark Knight l Logitech Z2300 speakers

    In progress the custom build PC Samurai Warrior ''Miyamoto Musashi'' in Japanese ''宮本 武蔵'' made by Pascal

  8. #8
    ROG Enthusiast Array
    Join Date
    Mar 2012
    Reputation
    10
    Posts
    54

    Just realised that I haven't posted up any good pics of the area that I will be installing the PC into. Here it is the area is about 30x19.25 on the outer dimensions.









    The goal is to have 2 shelves for the surround sound, XBOX 360 and PS3 with fans cooling them and the computer hanging above

  9. #9
    Shut Up Stupid! Array DaemonCantor's Avatar
    Join Date
    Jun 2011
    Reputation
    175
    Posts
    2,289

    Now that's a True Gamer! If the desk isn't Big enough Build one that IS!...Welcome to ROG! next MOD the rest of the House!

  10. #10
    AntiMatter Guru ROG Array chrsplmr's Avatar
    Join Date
    Jul 2011
    Reputation
    295
    Posts
    6,113

    dDog.. does your wife have a sister ?
    Last edited by chrsplmr; 03-03-2012 at 09:15 PM.

Page 1 of 8 1 2 3 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •