Page 6 of 6 FirstFirst ... 4 5 6
Results 51 to 55 of 55
  1. #51
    ROG Member Array
    Join Date
    Jan 2013
    Reputation
    10
    Posts
    10


  2. #52
    New ROGer Array
    Join Date
    Mar 2013
    Reputation
    10
    Posts
    2

    Click image for larger version. 

Name:	OC.jpg 
Views:	3 
Size:	378.3 KB 
ID:	18711

    Overclocked my ASUS G75VW. Runs extremely smooth at 805/1610. Such a great laptop.

  3. #53
    New ROGer Array
    Join Date
    Mar 2013
    Reputation
    10
    Posts
    3

    3930K 5 ghz oc

    Regards to all,

    first time posting on this forum.

    Here is my oc:

    System:
    Asus Rampage IV Extreme, BIOS 3602
    i7 3930K C2 5.05ghz 24/7 ( offset +0.185, LLC medium - prime95 27.9, 12 hours stable)
    XFX 7950 HD stock
    8GB (2X4 gb) 1600mhz Vengeance DDR3
    AX850 PSU
    Custom water cooling: 2 separate loops
    CPU loop: Phobya block & Alphacool UT60 140.3 + Alphacool UT60 120.3 + XSPC EX 120.3 rads
    GPU+MOSFET loop: EK blocks & XSPC RX 120.1 rad
    XSPS dual bay res. & 2 x DDC-1T + pumps
    Xigmatek Elysium
    Windows 7 64 bit

    Bios template:

    BIOS 3602 installed
    Turbo 50 HT on, Offset +0.185 Vcore, C1 on, C3,C6,C7 off;

    Extreme Tweaker menu:
    Ai Overclock tuner: Manual
    CPU Level up: Disabled
    ClockGen full reset: Enabled
    Turbo ratio: By all cores
    By all cores (can adjust in OS): 50
    Bclk freq: 100.1
    CPU Strap: 100
    CPU Clock gen filter: Auto
    Memory freq: DDR3-1606
    Extreme tweaking: Disabled
    EPU power saving mode: Disabled

    Extreme OV: Disabled
    Bclk skew: -3
    CPU Vcore V: Offset mode
    Offset mode sign: +
    CPU Vcore offset V: 0.185
    (CPU Vcore V: N/A)
    VTT CPU V: 1.125
    2nd VTTCPU V: Auto
    CPU VCCSA manual V: 1.150
    DRAM V (chA, chB): 1.55
    DRAM V (chC, chD): 1.55
    CPU PLL V: 1.65
    PCH 1.1v: Auto (1.1)
    VTTDDR voltage (chA, chB): Auto
    VTTDDR voltage (chC, chD): Auto
    CPU spread spectrum: Disabled
    PCIe spread sprectrum: Disabled

    Tweaker's paradise settings: Auto

    CPU Performance settings submenu:
    CPU ratio: Auto
    Enhanced Intel Speedstep tech: Enabled
    Turbo mode: Enabled
    Turbo mode parameters submenu; Power limit control: Auto

    DRAM timing control submenu:
    Rampage Tweak: Mode 1 (compatibility)

    CAS (tCL): 9
    RAS to CAS Delay (tRCD): 9
    RAS Pre time (tRP): 9
    RAS ACT time (tRAS): 24
    DRAM command mode : 1t
    Latency boundry: Auto


    Digi+ power control submenu:
    CPU load-line calibration: Medium
    CPU current capability: 140%
    CPU voltage freq: Auto
    VRM over temperature protection: Auto
    CPU power duty control: T.Probe
    Vcore MOS volt. control: Auto
    CPU power phase control: Optimized
    CPU Spread Spectrum: Disabled
    CPU Vcore boot up Voltage: Auto
    VCCSA load-line calibration: Auto
    VCCSA current capability: 120%
    VCCSA fixed freq: 300 (default)
    CPU VCCSA boot up voltage: Auto
    CPU VTT switching freq: Auto
    CPU VTT over-current protection: Auto
    DRAM-AB current capability: 120%
    DRAM-AB voltage frequency: Auto
    DRAM-AB power phase control: Optimized
    DRAM-CD current capability: 120%
    DRAM-CD voltage frequency: Auto
    DRAM-CD power phase control: Optimized
    PCH 1.1V switching freq: Auto


    Advanced menu.
    CPU configuration submenu:
    Intel Adaptive thermal monitor: Enabled
    Hyper-threading: Enabled
    Active processor cores: All
    Limit CPUID maximum: Disabled
    Execute disable bit: Enabled
    Hardware prefetcher: Enabled
    Adjacent cache line prefetch: Enabled
    Intel Virtualization tech: Enabled

    CPU power management submenu:
    CPU ratio: 50
    Enhanced Intel Speedstep tech: Disabled
    Turbo mode: Enabled
    CPU C1E: Enabled
    CPU C3 report: Disabled
    CPU C6 report: Disabled
    CPU C7 report: Disabled

    PCH configuration submenu:
    High precision timer: Enabled

    SATA configuration submenu:
    SATA mode: AHCI
    S.M.A.R.T. status check: Enabled
    Hot plugs: All Disabled

    USB configuration submenu:
    Legacy USB support: Enabled
    Legacy USB3.0 support: Enabled
    ECHI hand-off: Disabled
    Mass storage devices : Auto

    Onboard devices configuration submenu:
    Azalia HD audio: Disabled
    Bluetooth controller: Disabled
    Intel LAN controller: Enabled
    Intel LAN PXE OPROM: Disabled
    Asmedia USB3.0 controller: Enabled
    Asmedia USB3.0 battery charging support: Disabled
    ASM1061 storage controller: Disabled

    APM submenu:
    Restore AC power loss: Power off
    Power on by PS/2 kybd: Disabled
    Power on by PS/2 mouse: Disabled
    Power on by PCIe: Disabled
    Power on by RTC: Disabled
    ErP ready: Disabled

    Monitor menu:
    Anti surge support: Enabled


    Ambient temperature: 22-24 C
    Air/Water delta during prime 95 load: 4-6 C
    Load vCore 1.52-1.54 V

    Picture of computer: http://imageshack.us/photo/my-images/826/computerc.jpg/

    Cheers
    Miniatura de Adjuntos Miniatura de Adjuntos 1.4.2013-5ghz-12h.jpg  

    1.4.2013-5-memory.jpg  

    1.4.2013-llc1.jpg  

    Last edited by trihotecen; 04-03-2013 at 05:22 PM.
    Asus Rampage IV Extreme
    i7 3930K C2 5.05ghz 24/7 ( offset +0.185, LLC medium )
    AMD 7950 HD stock
    8GB 1600mhz Vengeance DDR3
    AX850 PSU
    Custom water cooling: 2 separate loops
    CPU loop: Phobya block & Alphacool UT60 140.3 + Alphacool UT60 120.3 + XSPC EX 120.3 rads
    GPU+MOSFET loop: EK blocks & XSPC RX 120.1 rad
    XSPS dual bay res. & 2 x DDC-1T + pumps
    Xigmatek Elysium
    Windows 7 64 bit

  4. #54
    Master Chef Array
    Join Date
    Apr 2013
    Reputation
    10
    Posts
    36

    I know that this isn't in the official format but I have gotten my MVF w/ i7 3770K stable at 4.9GHz @1.398v @67.5ºC. Are these normal numbers for this kind of setup??? Any tips to push it farther or is this about as far as I can go with this setup....

    Chef

  5. #55
    ROG Member Array
    Join Date
    Jun 2013
    Reputation
    10
    Posts
    5

    My first attempt at OCing, started a couple hours after fooling around with CPU Level Up.


    i7 2600k at 4.8GHz, 1.384V
    Maximus V Gene, BIOS 1802
    16GB Samsung 1600 Wonder RAM
    EVGA Reference GTX 680 at stock
    Lian Li mATX motherboard tray
    Seasonic SS II 520W
    Thermalright TRUE Spirit 120m (single fan baby!)






    BIOS template coming after stability testing


    I'm hunting down little screws to put my second 680 together with the stock cooler so I can get the whole rig assembled on air. The PSU is a temporary solution: in a couple days my SS-860 Platinum comes in and that'll be what powers the whole thing and lets me OC all components versus one at a time selectively. I'm curious if I'll still be able to hit the power and reset buttons with the second graphics card in place...
    Last edited by Caedo; 06-18-2013 at 05:12 PM.

Page 6 of 6 FirstFirst ... 4 5 6

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •