Enabling 160MHz BW on 5G-2 on GT-AX1100 only gets 80MHz enabled in Wireless Log.

[eblin]

The only way I could actually get the 160 was to select only the 160 Mhz in the channel bandwidth (not 20/40/80/160) turn on the 160 check box and force the control channel to 124. I have never been able to get both 5Ghz bands to use 160Mhz at the same time. If I turn on the 5G1 band then the 5G2 band will not select 160 Mhz even if I try to force it.
Attachment 83886

It Kept me on 160mhz for about 5-6 minutes and then auto transferred me on 141 or something like that at 80mhz .. I cant get it to work... ITs unstable it does whatever it wants lol

[rpc72]

Solution for me : I needed to "Forget" the network and re-join.
Now I'm on 160 Mhz, with channel 100, good luck to everyone

Thank you!!! This worked for me too!

[Saltgrass]

Thank you!!! This worked for me too!

After you changed it, what link speed are you showing. As I understand it, the 5G_2 is a 1x1 radio which is limited, even at 160 MHz. Assuming it will stay there..

[Holmes7]

For those who still look for the fix, you can go to Wireless -> Professional. Then at the very bottom change the region to US. You should now have the 160MHz enable option for 5Ghz-2. From Channel BW Dropbox, just select 160MHz instead of Auto between. Hope it helps!

[thierrybo]

Hi,

I do not have this region selection choice in my AX-11000 3.0.0.4.386_49599.