Doing a pretty simple build with a TUF GAMING X570-PLUS (WI-FI), three RGB 120mm fans, and two RGB LED strips daisy chained.
RGB 12v header 1 is connected to the RGB LED strips, 12v header 2 is connected to the daisy chained LED fans.
Aura does some things OK, but the panel only shows the mainboard, and "Add strip"
I thought it should show the mainboard, and both headers connected.
but, it does control the fans and strips, BUT, the colors are not correct on the strips. If I calibrate, it shows it syncing,
but I close that, and it's not correct.
I can force the correct colors by "lying" on seen colors during calibration.
the fans RGB calibrate correctly