Results 1 to 1 of 1
  1. #1
    New ROGer Array
    Join Date
    Jul 2019
    Reputation
    10
    Posts
    1

    Aura wont calibrate LED strips correctly

    Doing a pretty simple build with a TUF GAMING X570-PLUS (WI-FI), three RGB 120mm fans, and two RGB LED strips daisy chained.
    RGB 12v header 1 is connected to the RGB LED strips, 12v header 2 is connected to the daisy chained LED fans.

    Aura does some things OK, but the panel only shows the mainboard, and "Add strip"
    I thought it should show the mainboard, and both headers connected.

    but, it does control the fans and strips, BUT, the colors are not correct on the strips. If I calibrate, it shows it syncing,
    but I close that, and it's not correct.

    I can force the correct colors by "lying" on seen colors during calibration.

    the fans RGB calibrate correctly

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •