Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 26
  1. #11
    ROG Guru: Yellow Belt Array CSN7's Avatar
    Join Date
    Sep 2013
    Reputation
    10
    Posts
    144

    Don’t forget to raise uncore voltage to around +400 for 4000MHz

    Maybe xmp breaks something... I don’t know, I always use manual settings, forget xmp. Encore even boots 4400Mhz no problem on 9980XE. *I guess Omega is not much different. I have 4800 CL18 modules run at 3600 CL13 daily and 4000 CL12 for benching. Board is no problem. Io and rtl auto no problem. With initial they got approximately -1 tighter. Also on early Apex Board on this platform rtl manual tuning was never possible.

    EVGA Dark has worse latency *according to Aida64

  2. #12
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    22

    OK so after trying several set of ram from the QVL list and not getting any of them to work with the stated XMP profile i went a different route. the gskill ram on the asus qvl list was not on the gskill qvl list for this board, and vise versa none of the gskill ram on there qvl list for the encore is on the asus qvl list. I decide to get some of the 3733MHz ram with the 17-17-17-37 timings from the gskill website that has the encore on the qvl list, and sure as heck it booted the first time from the xmp profile. So for others with xmp issues, i would suggest trying ram from the memory manufacturer qvl list that has the encore on the list. But like i said all kits i tried from the asus qvl list for the encore cause boot failures or having to run way below the rated speeds to boot, the first kit i got from the memory manufacturer that has the encore board on the qvl list booted first time on XMP at 3733MHz. In fact there is no 3733MHz ram on the asus QVL list from any manufacturer but Gskill has several different 3733MHz kits on there QVL list for the encore board.
    Last edited by altonatrucker; 01-16-2020 at 06:48 PM.

  3. #13
    ROG Enthusiast Array Zbigniew PC Specs
    Zbigniew PC Specs
    Laptop (Model)Alienware 13 R2
    MotherboardAsus Rampage Encore bios 401
    ProcessorI9 7920X @4,7GHz Air
    Memory (part number)Trident Z f4-3200c14q-32gtzr
    Graphics Card #1Asus Strix Advanced 1070 Ti
    Sound CardCreative Labs Sound BlasterX AE-7
    MonitorAcer Predator XB321HK
    Storage #12x Samsung 970 PCI-EX
    Storage #2Plextor PX-512MB PCI-EX
    CPU CoolerProlimatech Genesis + 2x Corsair ML140RGB
    CaseThermaltake Level 20 ShowCase
    Power SupplySeasonic Prime Ultra 850W Titanium
    Keyboard Corsair K95 Platinium
    Mouse Corsair Dark Core
    Headset German Maestro 8.35 Mobile
    Mouse Pad FUNC XXL + Asus ROG Sheath
    Headset/Speakers Razer Mako (vintage)
    OS Windows 10 X64Pro
    Network Routerfiberway 120MB / sec (a sucked Huawei)
    Accessory #1 Rum Captain Morgan + Coca-cola wild cherry + ice
    Accessory #2 Knuckle with cabbage
    Accessory #3 Snickers Cake
    Zbigniew's Avatar
    Join Date
    Jan 2014
    Reputation
    21
    Posts
    31

    Sometimes problems have simple solutions. For me, in bios 0504 it was the same. I'm using G.Skill 3200 CAS14 and downgrade bios to version 0401 solved the problem. For me, 0504 sucks.
    Test this simple solution is not much work.
    Blessed are those who have not seen ... And now they see.

  4. #14
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    22

    Quote Originally Posted by Zbigniew View Post
    Sometimes problems have simple solutions. For me, in bios 0504 it was the same. I'm using G.Skill 3200 CAS14 and downgrade bios to version 0401 solved the problem. For me, 0504 sucks.
    Test this simple solution is not much work.
    I'm using the 0504 bios on mine, but i had the same issues with the 0401 bios as well.

  5. #15
    ROG Guru: Orange Belt Array vmanuelgm's Avatar
    Join Date
    Sep 2013
    Reputation
    48
    Posts
    340

    Quote Originally Posted by altonatrucker View Post
    OK so after trying several set of ram from the QVL list and not getting any of them to work with the stated XMP profile i went a different route. the gskill ram on the asus qvl list was not on the gskill qvl list for this board, and vise versa none of the gskill ram on there qvl list for the encore is on the asus qvl list. I decide to get some of the 3733MHz ram with the 17-17-17-37 timings from the gskill website that has the encore on the qvl list, and sure as heck it booted the first time from the xmp profile. So for others with xmp issues, i would suggest trying ram from the memory manufacturer qvl list that has the encore on the list. But like i said all kits i tried from the asus qvl list for the encore cause boot failures or having to run way below the rated speeds to boot, the first kit i got from the memory manufacturer that has the encore board on the qvl list booted first time on XMP at 3733MHz. In fact there is no 3733MHz ram on the asus QVL list from any manufacturer but Gskill has several different 3733MHz kits on there QVL list for the encore board.
    Seems your cpu is the limit, doesn't like high frequencies. 3800 is a good frequency paired with low timings to match quad channel with Intel Enthusiast CPU's.
    Omega, 10980xe, G.Skill 3600, 2080Ti, SM951 256, 970 PRO, 860 EVO
    Intel 750, WD SN750 Black, 840 Pro, 2xSkyhawk 4TB, 7200.14, 207EBK
    EVGA T2 1600, Silverstone TJ11, Custom LC. @Acer Predator x34

  6. #16
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    22

    Quote Originally Posted by vmanuelgm View Post
    Seems your cpu is the limit, doesn't like high frequencies. 3800 is a good frequency paired with low timings to match quad channel with Intel Enthusiast CPU's.
    Yes it is, now i have been able to get my Gskill 4266 ram with timings of 17-18-18-38 to run at 4200 stable on this encore motherboard with timings of 17-17-17-37 and 1.46v This with an i9-10940X at 5GHz

  7. #17
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    22

    Looks like the new 0505 bios release for the encore board has fixed the xmp profiles issue, i can now set to XMP and boots right up at 4266MHz. Hurray !!!

  8. #18
    ROG Guru: Orange Belt Array vmanuelgm's Avatar
    Join Date
    Sep 2013
    Reputation
    48
    Posts
    340

    Quote Originally Posted by altonatrucker View Post
    Looks like the new 0505 bios release for the encore board has fixed the xmp profiles issue, i can now set to XMP and boots right up at 4266MHz. Hurray !!!

    How do u test stability???
    Omega, 10980xe, G.Skill 3600, 2080Ti, SM951 256, 970 PRO, 860 EVO
    Intel 750, WD SN750 Black, 840 Pro, 2xSkyhawk 4TB, 7200.14, 207EBK
    EVGA T2 1600, Silverstone TJ11, Custom LC. @Acer Predator x34

  9. #19
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    22

    intel extreme tuning utility and prime 95

  10. #20
    ROG Member Array
    Join Date
    Feb 2018
    Reputation
    10
    Posts
    18

    Quote Originally Posted by altonatrucker View Post
    intel extreme tuning utility and prime 95
    Hello everyone. I'm going to revive this conversation a little. I'm able to get 4000mhz running at 17-17-17-37 gsat stable and hci memtest stable. I'm also able to get the raja@asus 4000mhz profile stable as well which is tight tertiary and secondary timings wise but his profile sets 17-18-18-38 I've learned how to get the rtls to lock to make this possible utilizing the rtl init setting under rtl settings. I have the rampage extreme vi board. I can not for the life of me however figure out how to get this mb to let me manually set the rtl settings and it's driving me nuts. I know what it likes rtl wise from extensive testing and like I said I have it stable but in a round about way. raja@asus is there a certain way to get this mb to let me set them manually?
    Last edited by thewebsiteisdown; 02-22-2020 at 09:11 PM.

Page 2 of 3 FirstFirst 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •