Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    Dec 2019
    Reputation
    10
    Posts
    1

    Installing Windows 10 as a 'new build'

    Hi all

    Five years ago when building my core i5 PC I found out after the build and OS install that I had a problem, resulting in system instability due to significant data loss. I had lots of issues with Windows updates and also with the USB 3 slots not working properly. I found out later that, especially with ASUS motherboards, I should have installed the OS with the board preferably outside the PC case and on a flat surface (e.g. the motherboard box), connected to just a power supply, a monitor, the hard drive, CPU fan, 4-pin speaker, and just 1 stick of RAM in slot B1 in order to avoid substantial data loss.

    With the help of Sevenforums experts, I was able to stabilize the PC to a large extent, especially with the Windows updates, but I never got USB 3 to work properly, and the slots remained marked slower than USB 2.

    Now I want to correct the build error by stripping the PC to its basics and starting from scratch to perform a clean install of Windows 10.

    How do I get the motherboard, ASUS B85M-G, to forget the mistake I made 5 years ago? Would resetting to default values be enough? Also, what is the installation sequence of the drivers I may need since I am starting afresh e.g.

    From Intel's website -

    Chipset Device Software

    From Asus site for Windows 10 -

    VGA
    Chipset (MEI)
    LAN
    BIOS
    AUDIO
    SATA (RAID, do I need this?)
    UTILITIES
    Hotfix (?)

    Thanks.

  2. #2
    ROG Guru: Orange Belt Array ThrashZone PC Specs
    ThrashZone PC Specs
    MotherboardASUS z490 maximus XII Apex 2nd x299 Rampage VI Apex
    Processori9-10900k & i9-9940x
    Memory (part number)Trident-Z 3600c16 2nd Trident-Z 3600C16 both Samsung B-Dies
    Graphics Card #1EVGA 1080ti FTW3 water block 2nd Titan Xp copper water block
    MonitorAOC G2460PG 24"G-Sync 144Hz & ASUS VG248QE 24" 144Hz
    Storage #12-Samsung 970 Evo Plus 500gb M.2 & 2.5" ssd's 850 pro's for os 850 evo for games
    Storage #22-LG Blu-Ray WH16NS40
    CPU Cooler2-240GTX with Heatkiller-4-Pro/ vrm water block Both&x299 2-280GTX 2-D5's before and after rads
    Case2- Corsair 450D with second floors for 240GTX & 280GTX rads enclosed and filtered on top
    Power SupplyEVGA 1000P2 2nd EVGA 1200P2
    Keyboard Logitech G910 Orion Spectrum 2nd Logitech G710+
    Mouse 2-Red dragon Perdition
    OS Win-7 & win-10 pro on both systems Win-7 everyday os
    Accessory #1 Optimus Foundation copper plexi 2nd Optimus SigV2
    Accessory #2 ModmyMods clear coolant
    Accessory #3 ModMyMods 3/8-5/8" clear soft tubing/ MORA 360 Pro x2
    ThrashZone's Avatar
    Join Date
    Oct 2017
    Reputation
    23
    Posts
    389

    Hi,
    VGA yes if you don't have a real graphics card and only plan on using onboard graphics for monitor.

    Chipset (MEI) yes

    LAN yes

    BIOS not really you don't say what bios version you're using but it rarely matters or fixes anything

    AUDIO yes

    SATA (RAID, do I need this?) yes

    UTILITIES no

    Hotfix (?) no

    Also USB download which you did not list which would be for usb 3.0 driver
    https://www.asus.com/us/Motherboards...Desk_Download/

    After the above id done use Device manager and see what Unknown devices are listed.

  3. #3
    ROG Guru: Brown Belt Array davemon50 PC Specs
    davemon50 PC Specs
    Laptop (Model)Asus G752VY-DH72 (17") and Asus G752VT-DH74 (17")
    MotherboardAsus ROG LGA2011-v3 Rampage V Edition 10, x99 EATX
    ProcessorIntel Core i7-6950X Extreme 10-core 25MB Cache 3.0 GHz
    Memory (part number)Corsair Vengeance LPX Red DDR4 DRAM 64GB-4x16 3333 (CMK64GX4M4B3333C16R)
    Graphics Card #1Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Graphics Card #2Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Sound CardAsus SupremeFX Hi-Fi Audio DAC
    Monitor(2) Dell UltraSharp U2515H 25-inch monitors
    Storage #1(4) SSD's - Samsung 960 & 970 1TB M.2, Intel 535 480G, Intel 510 250G
    Storage #2(3) HDD's - Western Digital Caviar Black 2TB 3.5-in SATA III 64MB Cache
    CPU CoolerCorsair Hydro Series H80
    CaseCorsair Obsidian Series 650D Black, ATX, Mid Tower
    Power SupplyCorsair Digital AXi-Series AX1200i (1200W) 80+ Platinum Rating
    Keyboard Logitech Wireless K360
    Mouse Logitech Wireless MX Anywhere 2
    Headset HyperX Cloud II
    OS Windows 10 Pro 64-Bit
    davemon50's Avatar
    Join Date
    Apr 2017
    Reputation
    48
    Posts
    1,126

    Quite honestly before you go through all that, did you install the USB3.0 driver or not? If you didn't why wouldn't you just do that first? Could be why you have no service.


    I find your first paragraph above (after the salutation) to be misleading, and actually not true. If you are going to rebuild, there is no need to build outside of a case with those things. I have built many PC's and never done that, 100% success rate. You actually will present more of a danger to damaging your motherboard if it's not set properly anyway (which installation in a case will do for you). All you need is to install first the basic components that run a PC. Install them in a case properly and connect only one hard drive and video card up to get started with your Windows installation. That is all you need to do, other than use the latest drivers from online that are for your specific motherboard. After you are stable you can install all the other accessories.
    Davemon50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •