12-28-2019 12:18 PM - last edited on 03-05-2024 08:16 PM by ROGBot
12-28-2019 11:17 PM
Dimachaerus wrote:
Anyone having issues getting the Motherboard to post with the recommended memory configuration for four RAM sticks (D1, C1, A1, B1)?
My motherboard posts fine if I populate the RAM in pairs (i.e. C1/C2 and B1/B2) but hangs when I try the four channel approach - the LED on the Motherboard gets stuck at "Mem Test".
I have CMT32GX4M4K3600C16(Ver4.31) which is on the QVL list but my friend has the same motherboard with four sticks of the G.SKILL Trident Z Neo F4-3600C16D-32GTZNC (not on the QVL list) and has the exact same issue - he also has the same issue when using my RAM.
I'm using the latest BIOS - otherwise all testing seems rock stable but frustrated with the memory situation.
01-02-2020 01:11 PM
bogdi1988 wrote:
You made sure the RAM is not bad, right? I bought 2 Trident Z Neo recently (2 kits of 2x16GB modules) and one kit had a bad stick - had to RMA it.
01-04-2020 05:24 PM
bogdi1988 wrote:
I just got my 2 other modules and with all 4 it posts fine at 3600mhz; no hickups. super happy with it so far!
01-10-2020 11:23 PM
Dimachaerus wrote:
When you say with all four I'm assuming you mean in D1, C1, A1, B1? Out of curiosity what memory are you using?
03-05-2020 04:02 AM
bogdi1988 wrote:
2 sets of GSkill Trident Z Neo (F4-3600C18D-32GTZN). Yes, running in D1, C1, A1, B1 (2nd from the CPU and 4th from the CPU on each side).
I even managed to overclock the RAM to 3733MHz (and Fabric Link to 1866) and it runs super stable!
03-19-2020 03:49 PM
bogdi1988 wrote:
2 sets of GSkill Trident Z Neo (F4-3600C18D-32GTZN). Yes, running in D1, C1, A1, B1 (2nd from the CPU and 4th from the CPU on each side).
I even managed to overclock the RAM to 3733MHz (and Fabric Link to 1866) and it runs super stable!
01-06-2020 10:56 AM
Dimachaerus wrote:
Anyone having issues getting the Motherboard to post with the recommended memory configuration for four RAM sticks (D1, C1, A1, B1)?
My motherboard posts fine if I populate the RAM in pairs (i.e. C1/C2 and B1/B2) but hangs when I try the four channel approach - the LED on the Motherboard gets stuck at "Mem Test".
I have CMT32GX4M4K3600C16(Ver4.31) which is on the QVL list but my friend has the same motherboard with four sticks of the G.SKILL Trident Z Neo F4-3600C16D-32GTZNC (not on the QVL list) and has the exact same issue - he also has the same issue when using my RAM.
I'm using the latest BIOS - otherwise all testing seems rock stable but frustrated with the memory situation.
01-10-2020 11:24 PM
trango wrote:
I have exact same issue. 4 DIMMs on QVL only work on channels A/B. C/D slots when populated cause hang in Memory Test in BIOS. All sticks on just A/B boot fine with full memory recognized, but as you know just 2 of the 4 channels of BW....
Anyone figure out a solution? Running 0702 FW.