Results 1 to 2 of 2
  1. #1
    New ROGer Array Pavoluhliarik PC Specs
    Pavoluhliarik PC Specs
    MotherboardAsus Maximus XI Hero
    ProcessorCore i9 9900k @ 5GHZ (XMP) 1.300 V
    Memory (part number)Kingston predator HX430C15PB3K2/32
    Graphics Card #1Asus Rog Strix 2018ti oc
    Sound Cardon board
    MonitorAsus PG279Q Gaming Monitor
    Storage #1Samsung 970 evo 1Tb-os
    Storage #2Samsung 850 evo 1TB-games
    CPU CoolerBe quiet 240 water cooling
    CaseEvga dg 84
    Power SupplyCorsair HX 1200w platinum
    OS Windows 10 pro 64b
    Network RouterMikrotik RB4011iGS+5HacQ2HnD-IN
    Accessory #1 Online UPS PS 30N

    Join Date
    Sep 2018
    Reputation
    10
    Posts
    15

    Install Win 10 M.2 nvme drive

    I bought a new M.2 nvme Samsung 970 evo 1Tb drive.I want to do a clean install of win 10 system disk will be samsung 970 evo 250Mb.I want to ask if I should put away the other nvme disk before installing win 10 or I can leave it there for installation. thank you

    Does this also apply to two nvme?


    Here is the procedure for install of Windows on a Nvme drive.

    1 - Make sure you unplug all SATA and USB drives, the M.2 drive has to be the only drive installed.
    2 - Go into the bios, under the boot tab there is an option for CSM, make sure it is disabled.
    3 - Click on secure boot option below and make sure it is set to other OS, Not windows UEFI.
    4 - Click on key management and clear secure boot keys.
    5 - Insert a USB memory stick with a UEFI bootable iso of Windows 10 on it.
    6 - Press F10 to save, exit and reboot.
    7 - Windows will now start installing to your NVME drive as it has its own NVME driver built in.
    8 - When the PC reboots hit F2 to go back into the BIOS, you will see under boot priority that windows boot manager now lists your NVME drive.
    9 - Click on secure boot again but now set it to WIndows UEFI mode.
    10 - Click on key management and install default secure boot keys
    11 - Press F10 to save and exit and windows will finish the install.

    Once you have Windows up and running, shutdown the PC and reconnect your other SATA drives. Typically you don't put anything on SATA port 1 as this is now reserved for the NVME drive and may cause a conflict.

    HWinfo https://www.hwinfo.com/ can check to see if done correctly, on the bottom right of the system summary, Operating System UEFI Boot (in green) & Secure Boot (in green) would be clean install of windows on to Nvme.
    Last edited by Pavoluhliarik; 01-02-2020 at 08:01 PM.

  2. #2
    ROG Guru: Yellow Belt Array Ch3vr0n PC Specs
    Ch3vr0n PC Specs
    MotherboardAsus Maximus XI Formula
    ProcessorCore i9 9900k @ 4.7GHZ (XMP)
    Memory (part number)CMT32GX4M4Z3200C16
    Graphics Card #1Asus Strix GTX 1080 A8G
    Sound Cardon board
    MonitorASUS VG278HR & ASUS VK278Q
    Storage #1Samsung 970 Evo 1TB (Boot) & 970 EVO 2TB (Scratch)
    Storage #23X HGST 10TB, 1x HGST 4TB
    CPU CoolerScythe Mugen 5 PCGH
    CaseCooler Master Cosmos II
    Power SupplyCorsair AX860i
    Keyboard Corsair k95 RGB Platinum
    Mouse Corsair M65Pro RGB
    Headset Corsair Voide Wireless SE
    Mouse Pad Corsair MM300 + Corsair MM800 Polaris (EU)
    Headset/Speakers Logitech Z-906
    OS Windows 10 Pro x64
    Network RouterNetgear XR500
    Accessory #1 Xbox One Elite Wireless Controller
    Accessory #2 2X Corsair LL140, 4x Corsair LL120
    Accessory #3 1x Corsair LED RGB Pro expansion kit, 2x LS100 RGB kit + 450mm expansion kit
    Ch3vr0n's Avatar
    Join Date
    Nov 2012
    Reputation
    38
    Posts
    237

    Technically you don't have to remove ANY drives. You just need to select the right one. If you leave them in just by the size difference between the 2 drives alone, plus the fact that that 1TB drive should be listed as "unallocated space" you should be able to easily spot the new and old drive. However if you're not too sure, it certainly cannot hurt, if only 1 storage device is connected, you don't exactly have much choice where to install windows

    The only thing i'd recommend directly after installing windows is to install the samsung nvme driver and use that instead of the default windows one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •