Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jan 2020

    Exclamation Vcore voltage and dram frequency issues in Maximus XI Hero

    My system is new, been like only 5days since u built it. Was working fine for 2 days but then the monitor displayed "No signal" in screen randomly during gaming I thought it was some issue with the cables but it made me turn off my monitor for every 1-2times in an hour, and bsod eventually.updated the bios, changed ram slots and reapplied thermal paste replacing the dried out one in the aio and disable turbo clock, now I don't face any issues regarding that, temperature idles around 38. Now the issue is whenever I set ram settings to it's original frequency "3200 MHz" using xmp profiles my computer turns on and off quickly and after 2 seconds it starts itself and runs normally, this happens only when I power on the PC for the first time in the day, after that shutting off and turning on is normal. This dram issue has been the same from the start.

    When I set the ram settings back to default it boots up right after a single click on the power button, what am I doing wrong? Or the ram settings cannot be changed? Also the CPU I have is a i7-9700k at base clock.. it's vcore voltage is default set to 0.995v should I be worried? I heard the default one was around 1.25 any suggestions regarding this matter would help me, thanks!
    Last edited by sivas231; 01-03-2020 at 04:55 AM.

  2. #2
    ROG Guru: Yellow Belt Array Carlyle2020 PC Specs
    Carlyle2020 PC Specs
    Laptop (Model)amd4000 for sure next time
    MotherboardAsus Maximus XI APEX
    Processorgaming9900ks/@5.2 avx -1 / manual vcore 1.32/LLC5/AC+dc 0.01/TVB off/all power savings on
    Memory (part number)Corsair LPX 4000 CL19@16.17.28/300/2T/ 1.42 volt
    Graphics Card #1Gainward RTX 2080Triple/tempsense on Displayport needed
    Sound CardXonar STXII mods:3xLME 49720NA
    MonitorLG 38GL950G / -HDR / +madVR
    Storage #12TB 970evo plus nvme
    Storage #21TB 960evo nvme +2x 1tb evo 860 hw-sata-raid
    CPU Coolerarctic freezer II 280
    CaseV2-Silverstone FT2 dampened up the wazoo
    Power SupplySeasonic TX-850
    Keyboard Cherry KC 1000 on top of a cherry MX1 for ergonomics :)
    Mouse MX Master 3
    Headset Sennheiser PC360 + Philips X2HR
    Headset/Speakers A250 / cause LG was stingy
    OS Win 10 64bit
    Network Routeryeah right...
    Accessory #1 Silverstone EBA01 headphone stand / black
    Accessory #2 radio Keyfob to turn on and off
    Accessory #3 4 bay fantec /10tb red/+scrap

    Join Date
    Mar 2018

    Hi there,

    i'm on the run so in short:

    "...what am I doing wrong?" - nothing. it's normal on a cold start basically with certain bios configurations. I think over 20 people have asked this in one form or another.

    "should I be worried?" - no, since it is the regular vcore on a "non-boost clock". (yours is 3.6 Ghz?!)

    Rgds Carlyle
    Last edited by Carlyle2020; 01-03-2020 at 10:00 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts