Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jan 2020
    Reputation
    10
    Posts
    1

    Exclamation Vcore voltage and dram frequency issues in Maximus XI Hero

    My system is new, been like only 5days since u built it. Was working fine for 2 days but then the monitor displayed "No signal" in screen randomly during gaming I thought it was some issue with the cables but it made me turn off my monitor for every 1-2times in an hour, and bsod eventually.updated the bios, changed ram slots and reapplied thermal paste replacing the dried out one in the aio and disable turbo clock, now I don't face any issues regarding that, temperature idles around 38. Now the issue is whenever I set ram settings to it's original frequency "3200 MHz" using xmp profiles my computer turns on and off quickly and after 2 seconds it starts itself and runs normally, this happens only when I power on the PC for the first time in the day, after that shutting off and turning on is normal. This dram issue has been the same from the start.

    When I set the ram settings back to default it boots up right after a single click on the power button, what am I doing wrong? Or the ram settings cannot be changed? Also the CPU I have is a i7-9700k at base clock.. it's vcore voltage is default set to 0.995v should I be worried? I heard the default one was around 1.25 any suggestions regarding this matter would help me, thanks!
    Last edited by sivas231; 01-03-2020 at 04:55 AM.

  2. #2
    ROG Guru: White Belt Array Carlyle2020 PC Specs
    Carlyle2020 PC Specs
    MotherboardAsus Maximus XI APEX w/o vrm heatsink
    Processor8086K/@5.1/1.305/LLC5
    Memory (part number)Corsair LPX 4000 CL19@17.21.41/560/2T
    Graphics Card #1OOO RTX 2080 Ti FTW3 ULTRA
    Graphics Card #2GTX 1060
    Sound CardOOO Xonar STX modified
    Monitor21: 9 LG 34 inch / flat
    Storage #11TB 960evo
    Storage #22TB 970evo plus
    CPU CoolerNoctua NH-D15
    CaseSilverstone FT2 +200 bucks of sounddampening
    Power SupplySeasonic TX-850 RMAed the prime tita1000w
    Keyboard Cherry KC 1000 / OOO CORSAIR K63 + lapboard
    Mouse MX Master 2S
    Headset Sennheiser PC360 + Philips X2HR
    Headset/Speakers klipsch 4.1 pc speaker /cooling modified
    OS Win 10 64bit
    Network Routeryeah right...
    Accessory #1 Silverstone EBA01 headphone stand / black
    Accessory #2 radio Keyfob to turn on and off from Garage
    Accessory #3 Adata USB3.1 512Mb SSD @480Mb ul/dl

    Join Date
    Mar 2018
    Reputation
    17
    Posts
    121

    Hi there,

    i'm on the run so in short:

    "...what am I doing wrong?" - nothing. it's normal on a cold start basically with certain bios configurations. I think over 20 people have asked this in one form or another.

    "should I be worried?" - no, since it is the regular vcore on a "non-boost clock". (yours is 3.6 Ghz?!)

    Rgds Carlyle
    Last edited by Carlyle2020; 01-03-2020 at 10:00 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •