I know that the new pump is working fine. Running at 2080RPM, fans at 1100RPM, idle liquid temp is 25c, under full load as high as 32c. I overclocked this 6850k about 4 years ago when I got it, was running 4.3 ghz at 1.3v with no issues up until the h110i pump died. Under full load on OCCT I was only hitting 79c after 4 hours, idled around 25c. When I put the h115i in after the the h110i failed, I first reset my BIOS settings to stock, on first boot temps were good, I didn't run any stress test as it was first boot after the thermal shutdown.. afterward I went back into BIOS and re-enabled RAID and just chose the XMP profile for my overclock, modest 4ghz, manually set CPU voltage to 1.22 and the rest of the voltages I manually set to stock. Since then I have been getting these higher temps... setting back to stock does nothing, I've remounted the pump several times to assure the contact was good, which I can confirm it us, pushing firmly on the pump head results in maybe a 1-2c difference under full load.
Here is some detailed info from HWiNFO. I am recovering files from my crashed RAID and downloading some things from the internet, browsing these forums... nothing major.