Aquantia 10G 3.1.100 Firmware Update

[vmanuelgm]

https://mega.nz/#!dn4EWQ5R!Xi24jReEU...9zgXnuJho8FAcc

Execute under CMD as Admin atlflashupdate.exe, select y to update, then Aquantia device number=1 and enter, wait the update messages and done!!!

[broncogr]

This wouldn't work on my Rampage Extreme VI
I already had 3.1.90 flashed and the above file gave me Update Status Not available...
Workaround
1)Get the 3.1.90 firmware from station-drivers
2) Get the above mentioned 3.1.100 update
3) Copy the 3 .clx files from th3 3.1.100 folder to the 3.1.90 update folder
4) Edit the updatedata.xml file in the 3.1.90 folder substituting where the 3 .3.1.90 clx files are mentioned with 3.1.100 ( change .90 with .100)

After that use the above instructions to flash

Mine flashed perfectly fine after that

P.S There is also a new driver out 2.1.19.0 . Get that too from station-drivers

[vmanuelgm]

I forgot to include all the device ID's, so the files in my link worked in Omega boards only.


Here is the new files link for all the boards:

https://mega.nz/#!dn4EWQ5R!Xi24jReEU...9zgXnuJho8FAcc

Just execute atlflashupdate.exe under CMD as Admin and follow the steps.

[restsugavan]

Thank you very much @vmanuelgm working fine on R6E

Happy New Year all.

[vmanuelgm]

Thank you very much @vmanuelgm working fine on R6E

Happy New Year all.

Welcome, mate, and happy new year to u too!!!

[czechoj]

This wouldn't work on my Rampage Extreme VI
I already had 3.1.90 flashed and the above file gave me Update Status Not available...
Workaround
1)Get the 3.1.90 firmware from station-drivers
2) Get the above mentioned 3.1.100 update
3) Copy the 3 .clx files from th3 3.1.100 folder to the 3.1.90 update folder
4) Edit the updatedata.xml file in the 3.1.90 folder substituting where the 3 .3.1.90 clx files are mentioned with 3.1.100 ( change .90 with .100)

After that use the above instructions to flash

Mine flashed perfectly fine after that

P.S There is also a new driver out 2.1.19.0 . Get that too from station-drivers

Thanks for the tips. It helped...

[leghmoh]

This wouldn't work on my Rampage Extreme VI
I already had 3.1.90 flashed and the above file gave me Update Status Not available...
Workaround
1)Get the 3.1.90 firmware from station-drivers
2) Get the above mentioned 3.1.100 update
3) Copy the 3 .clx files from th3 3.1.100 folder to the 3.1.90 update folder
4) Edit the updatedata.xml file in the 3.1.90 folder substituting where the 3 .3.1.90 clx files are mentioned with 3.1.100 ( change .90 with .100)

After that use the above instructions to flash

Mine flashed perfectly fine after that

P.S There is also a new driver out 2.1.19.0 . Get that too from station-drivers

Worked fine for me thanks a Lot.

[Hopper64]

I think Marvell bought aquantia? Is this the same driver and FW here at this link?

*https://www.marvell.com/support/down...archResults.do

[Megalamaniac]

I think Marvell bought aquantia? Is this the same driver and FW here at this link?

*https://www.marvell.com/support/down...archResults.do

I downloaded from the Marvel site and the update wouldn't work for me. It said "Not Available" under status. When I checked for the Device ID, it wasn't in the .xml file.

I came back to the forum and checked the screen shots in this thread and they display the exact same Device ID. I downloaded from the post link and everything was identical except for the .xml file, which included my Device ID. I replaced the .xml file and the update worked.

I've got a Rampage VI Extreme and the Aquantia AQC107 Device ID of D107-87571043 (Now updated to 3.1.100)

Thanx for the link vmanuelgm !!!

[jedi95]

I forgot to include all the device ID's, so the files in my link worked in Omega boards only.


Here is the new files link for all the boards:

https://mega.nz/#!dn4EWQ5R!Xi24jReEU...9zgXnuJho8FAcc

Just execute atlflashupdate.exe under CMD as Admin and follow the steps.

Thanks! This worked on my Maximus X Apex (5G LAN) and Zenith II Extreme (10G LAN)