Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    Jan 2018
    Reputation
    10
    Posts
    3

    Question Zenith II Extreme - GPU wont click in place

    Anyone run into an issue with a GPU not clicking/seating deep enough into the PCIE slot?

    Take note of the left edge of, above the SupremeFX Armor

    Click image for larger version. 

Name:	image0.jpg 
Views:	0 
Size:	126.6 KB 
ID:	83768


    I was thinking of getting a dremel and grinding a notch in the SupremeFX Armor so that my GPU can fit.

    I didnt take the motherboard out of my case yet, so cant check the back side to see if there are any screws holding it in place.
    If there are screws, im just going to take the armor off and cut a slot instead.

    GPU is a EVGA 1080 Hydrocopper. I was thinking of getting a 2080 TI FTW3 Hydrcopper so that it can fit, but I really want to get the 3080 Ti this year.

  2. #2
    New ROGer Array
    Join Date
    Jan 2018
    Reputation
    10
    Posts
    3

    Can ignore thread, didnt realize the rubber cable grommets were pushing my motherboard up, slightly bending it.

    all is good now, had to cut them

    Its a snug fight though for sure.

    Click image for larger version. 

Name:	image1.jpg 
Views:	0 
Size:	477.3 KB 
ID:	83770

  3. #3
    ROG Guru: Platinum Belt Array Rockford PC Specs
    Rockford PC Specs
    MotherboardASUS ROG STRIX B450-I GAMING
    ProcessorRYZEN 2700X
    Memory (part number)CRUCIAL BALLISTIX TACTICAL 2X4GB
    Graphics Card #1ASUS GEFORCE GTX 970 DC2OC BLACK
    MonitorDELL U SERIES
    Storage #1KINGSTON A400 120GB SATA III
    Storage #2KINGSTON A400 480GB SATA III
    CPU CoolerRYZEN WRAITH PRISM
    CaseBENCH
    Power SupplyEVGA SUPERNOVA G2 650W
    Keyboard DUCKY TKL MEKA
    Mouse CORSAIR HARPOON
    Headset ASTRO A50 WIRELESS
    Accessory #1 WIFE
    Rockford's Avatar
    Join Date
    Jan 2012
    Reputation
    218
    Posts
    6,275

    yeah that's the true definition of snug fit right there ))

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •