Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Dec 2018
    Reputation
    10
    Posts
    1

    Post ROG ZENITH II EXTREME DIMM.2 and SLI issue

    Hi,

    In the process of building a new HEDT, I ran into the problem that when i install the Dimm.2 my SLI (2xEVGA FTW3 1080ti) stops working/disappear. One of the GPUs is working and can be used fine as monitor the other not. The cards are not recognized by the driver either. I can see both drives in the Dimm.2 fine and they work ok.

    All drivers are updated. BIOS settings seems fine, have checked all settings and cannot find a solution.

    ROG ZENITH II EXTREME
    4x16 GB G.skill TridentZ Neo DDR4-3600 C16 (AMD)
    2x1 Tb Corsair Force MP600 NVMe Gen4 M.2
    2xEVGA FTW3 1080ti

    2x500 Gb Samsung 970 EVO Plus SSD M.2 2280 in Dimm.2 (

  2. #2
    New ROGer Array
    Join Date
    Jan 2020
    Reputation
    10
    Posts
    11

    Hello,

    Did you try to install/invert your M.2 modules in the slots next to PCIE on the motherboard instead of DIMM.2?

    In BIOS you can try to set the PCIE Gen for graphics card = Gen 3 and M.2 = Gen4 for MP600

    Your cards should be in PCIE16x slot 1 and 3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •