Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jan 2020
    Reputation
    10
    Posts
    2

    MAXIMUS XI HERO: booting into BIOS, ignores boot list

    I have a semi-tricky config: booting Mojave MacOS off internal M.2 SSD number 1 ... booting Win10 off internal PCIe SSD number 2...

    All this was working fine yesterday. Could boot into Clover and then select either the Mojave or the Win10 disk, and Bingo, up comes the selected OS. Reboot and yes, back into Clover and select disk and away we go. I thought I'd really got the hang of this dual booting thing.

    I disabled auto-updates in Win10, had heard that they could stomp the EFI partition.

    I left Win10 up for about 24 hours, installing some S/W, running benchmarks and malware detectors etc. Then after a bit of relaxing gameplay I decided to switch back to Mojave.

    Which I have done before, yesterday. Please note I did not touch Win10 core or EFI partition or change anything OS-configgy.

    Imagine my cussing when my mobo would not boot to clover, or even directly into Win10. It got in an endless boot-into-BIOS thing, where no matter how I set my EFI boot priority list in the BIOS menu, when I Save and Reset I end up right back in BIOS every time! Finally had to plug in a USB stick to get Mojave back (BIOS did acknowledge and boot the EFI on the stick. thank goodness).

    So I'm here to testify that this problem is not specific to older boards. I have no idea what causes it, but it's bloody frustrating when it happens and so far I have not found any sure cure. I wonder if I should update my BIOS (scary!) -- haven't wanted to touch it for fear of breakage, but looks like it's broken pretty bad so maybe not much to lose? Board's only been in service about 3 weeks.

    And yes, before y'all ask: Secure Boot is OFF, Fastboot is OFF, CSM is OFF. And there is a perfectly good EFI partition on the main boot disk (I just checked it).

    So anyway... this is really annoying and I wonder if anyone has a clue 'cos I am fresh out.

  2. #2
    ROG Guru: Orange Belt Array XYchromosone PC Specs
    XYchromosone PC Specs
    MotherboardASUS Maximux XI Extreme [BIOS 1602]
    Processori9 9900KS
    Memory (part number)G.Skill Trident Z RGB CL17 3600MHz 32GB [4x8]
    Graphics Card #1ASUS ROG Strix Gaming GTX 1080Ti 11GB
    MonitorAOC AGON AG271QG 27" 144Hz [165Hz OC]
    Storage #12 X Samsung 970 Pro NVMe 1TB M.2 SSD [DIMM.2_1+ DIMM.2_2]
    Storage #2Samsung 850 Evo SSD 500GB SATA 3
    CPU CoolerThermaltake Floe Riing 360 Premium AIO
    CaseFractal Design Define R6 Black
    Power SupplyCorsair AX1600i
    Keyboard RAZER Blackwidow X Tournament Chroma
    Mouse RAZER Lancehead [ambidextrous] Chroma
    Headset Sennheiser RS165 Wireless
    Headset/Speakers Sennheiser CX 100 inner ear headphones
    OS Windows 10 Pro x64 + Ubuntu Studio 20.04
    Network RouterASUS DSL-AC68U
    XYchromosone's Avatar
    Join Date
    Dec 2015
    Reputation
    30
    Posts
    331

    try turning off the power from the wall socket to the psu for 30 seconds. Then see if it stops the boot-to-BIOS loop.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •