Asus Zenith II TR40 : Fan Expanion Card detected in Windows but not in BIOS.

[macmus]

I have both Zenith X399 Alpha and TRX40.
In both cases I use expansion fan card.

In case of X399 Fan card is detected properly in bios and OS, but in case of TRX40 it's only detected under OS..

I tried different bioses... reset the bios.. pull the battery etc.. nothing retrigger expansion card to be detected?

[injurer]

I have both Zenith X399 Alpha and TRX40.
In both cases I use expansion fan card.

In case of X399 Fan card is detected properly in bios and OS, but in case of TRX40 it's only detected under OS..

I tried different bioses... reset the bios.. pull the battery etc.. nothing retrigger expansion card to be detected?

I have Zenith II and the fan extension is not available in the BIOS. I am not sure that it actually should be as it's still an addon card.

What bothers me most is that under AI Suite 3 the minimum fan speed is 60% for the extension card fans.

[macmus]

injurer.. i think it's a bios bug.. I had expansion card available under bios in ZAlpha X399 board!
In fact i had all my fans connected to it and I did all FAN speed assignments there.

It's not available in bios now in TRX40, but it shows up in OS!.

[macmus]

Hey asus what isyour take on this ? what happened ?

[gontch]

Hello,

@ASUS, same request here! Please add extension card II support in EUFI on Zenith II series

It would be also good to fix spin up/down time settings that don't have any effect regardless if it's set in EUFI or FanXpert
https://rog.asus.com/forum/showthrea...137#post798137

Thanks

[macmus]

Same issue in Z2Alpha now too.

WTF Asus is thinking..

[macmus]

Why this is ****ing not taken care of... Asus is ridicukus.