Is there a rog board... (mixing memory)

[bimbo]

Well the freezing is still happening, but no black screens anymore. It happens a bit randomly.

Does anyone know of a set or ram modules, that work without problems as i am willing to
buy another set, if they will not present these problems running on the the board i have.

Tried to do my own research, but failed to come up with an answer. Alternatively i could buy
a motherboard and ram combi, that has been tested i supose.

Thanks guys.
Vinnie.

[mdzcpa]

You should go to the Support Page for the 470-F and check the QVL (qualified vendor list)

Here: https://www.asus.com/us/Motherboards.../HelpDesk_QVL/

Review the memory QVL lists for the CPU you want to run. The memory has been tested to work.
TIP: when doing a build, always check out the QVL

[bimbo]

Thank you for your information.

Vinnie.

[bimbo]

I have had a look on Mr Memory and they have:

Kingston HyperX Fury DDR4 PC4-25600 3200MHz DIMM

If i purchased this as 4x16gb would that be good.

or should i get:

2x16 and 2x8gb

Vinnie.

[AlexB121]

Yipee!
You guys rock.
Placed a pair of ram 16gb into slots A2, B2 and problem gone. So a huge thanks for that information.

Another Question.
Would i be better off, putting one of my remaing 16gb sticks into A1 or would buying two sticks at 8gb
and putting them into A1, B1.

Any info would be much apreciated.
Vinnie

So do us a favor and change this thread TITTLE because the issue is not on the board...... Next time instead of blaming asus for something research or create a thread with a different TITTLE.... Thanks in advance

[bimbo]

I am truly sorry for making you angry and i am sincerely sorry for my blatant mistake
in blaming Asus in anyway for my miss judgement.

In future, i will buy a complete combination of motherboard, processor and memory.
That way i will not run into any problems of the hardware.

Once again i apologise to you wholeheartedly.

Vinnie.

[Arne Saknussemm]

I have had a look on Mr Memory and they have:

Kingston HyperX Fury DDR4 PC4-25600 3200MHz DIMM

If i purchased this as 4x16gb would that be good.

or should i get:

2x16 and 2x8gb

Vinnie.

Vinnie! Be careful man...I'm left wondering if you have understood what we are saying.

Buy ONE SINGLE kit of the size you want. Quad channel or "dual/Quad"

2x16 and 2x8 would be different kits and land you right back where you are...

Go here https://www.gskill.com/configurator and choose carefully.

[xeromist]

So do us a favor and change this thread TITTLE because the issue is not on the board...... Next time instead of blaming asus for something research or create a thread with a different TITTLE.... Thanks in advance

I updated it, but go easy. How would he know to create a different title when to the best of his knowledge he was having a board issue? Titles that just say "it's not working" or "help" are pretty useless.

[bimbo]

Thanks Arn

so this is what i found on G.skill. after entering the following
ASUS, AMD X470, ROG STRIX X470-F GAMING

F4-3200C16Q-32GTZKO
Trident Z
DDR4-3200MHz CL16-18-18-38 1.35V
32GB (4x8GB)

I think that you are correct in my not understanding what was being said.
Would this memory be ok to buy in your opinion.

Vinnie

After looking at the price of this. It is way out of my budget.

[mdzcpa]

Vinnie:

If it is out of your budget you will need to find another memory kit. However, as stated about, if you want to run 4 sticks of memory, it needs to be a 4 stick kit. never combine kits. Even if it is the same part number. What you selected about is expensive but would work.