Results 1 to 3 of 3
  1. #1
    New ROGer Array TobesEtc PC Specs
    TobesEtc PC Specs
    MotherboardAsus Prime Z390-A
    ProcessorIntel i9-9900K
    Memory (part number)Corsair CMK32GX4M2A2666C16 Vengeance LPX 32 GB (2 x 16 GB) DDR4 2666 MHz C16 XMP 2.0
    Graphics Card #1ROG Strix RTX2070 Super
    MonitorAOC 2777PQU
    Storage #1Samsung 970 Evo 1TB
    Storage #2Samsung 860 Pro
    CPU CoolerROG Ryuo 240
    CaseCorsair 100R
    Power SupplyCorsair RM750x
    Keyboard MS Modern w Fingerprint
    Mouse MS Surface
    Headset Audio-Technica ATH-W1000X
    Mouse Pad er.... Ikea desk?
    OS Windows 10
    Network RouterSky Q
    Accessory #1 ASUS PCE-AC88 Wireless PCI-E Network Interface Card
    Accessory #2 ASUS USB-BT400 3Mbps USB Bluetooth v4.0
    Accessory #3 DEEPCOOL RF120 5IN1, 5x120mm RGB PWM Fans with Fan Hubs

    Join Date
    Jan 2020
    Reputation
    10
    Posts
    15

    Armoury Crate 2.5.7.0 & ROG Strix RTX2070S

    Recently built a new PC (Prime Z390-A, RYUO 240, Strix RTX2070S and Aura Terminal). I've installed Armoury Crate 2.5.7.0 and have run all updates. Have updated all device drivers. Windows 10 64, fully up to date (according to Microsoft yesterday).

    When I go into AURA Sync I see all devices listed: PRIME Z390-A, ROG RYUO, TERMINAL, ROG STRIX. If I sync them all and use Aura effect, they all work the same. Fan control and OLED display for ROG RYUO all work.

    However - for reasons which I now forget and wish had never happened - I want to have the ROG RYUO Cooler and ROG STRIX GPU in one colour effect (let's say red) and everything else in another colour effect (lets say blue). I figured you'd do that by going to AURA Sync, selecting/ticking PRIME Z390A and TERMINAL (leaving RYOU Cooler and STRIX GPU unticked), then via AURA EFFECT setting those devices to Blue. That bit works. Mobo and everything via that and Terminal go Blue.

    I then assumed (duh!) that I could go up to DEVICES and set the other two components that way. Indeed, for the ROG RYUO that does work. However, the ROG STRIX GPU isn't displayed there and for the life of me I cannot figure out how I could control the GPU if I want it independent of MOBO colour?

    Should hte GPU (and the Controller for that matter) be displayed in DEVICES? How would I set their colour independent of mobo?
    Miniatura de Adjuntos Miniatura de Adjuntos Step 2.jpg  


  2. #2
    ROG Guru: Orange Belt Array
    Join Date
    Apr 2019
    Reputation
    19
    Posts
    272

    there is an other tool for gpus if u want to conrol it go to the support page of your gpu

  3. #3
    New ROGer Array TobesEtc PC Specs
    TobesEtc PC Specs
    MotherboardAsus Prime Z390-A
    ProcessorIntel i9-9900K
    Memory (part number)Corsair CMK32GX4M2A2666C16 Vengeance LPX 32 GB (2 x 16 GB) DDR4 2666 MHz C16 XMP 2.0
    Graphics Card #1ROG Strix RTX2070 Super
    MonitorAOC 2777PQU
    Storage #1Samsung 970 Evo 1TB
    Storage #2Samsung 860 Pro
    CPU CoolerROG Ryuo 240
    CaseCorsair 100R
    Power SupplyCorsair RM750x
    Keyboard MS Modern w Fingerprint
    Mouse MS Surface
    Headset Audio-Technica ATH-W1000X
    Mouse Pad er.... Ikea desk?
    OS Windows 10
    Network RouterSky Q
    Accessory #1 ASUS PCE-AC88 Wireless PCI-E Network Interface Card
    Accessory #2 ASUS USB-BT400 3Mbps USB Bluetooth v4.0
    Accessory #3 DEEPCOOL RF120 5IN1, 5x120mm RGB PWM Fans with Fan Hubs

    Join Date
    Jan 2020
    Reputation
    10
    Posts
    15

    I cannot believe that the answer is so simple - thank you! Yes, that appears to have worked perfectly!

    Now... why didn't Asus Support tell me that? ;-)

    Thank you!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •