Page 2 of 2 FirstFirst 1 2
Results 11 to 14 of 14
  1. #11
    New ROGer Array Nero666 PC Specs
    Nero666 PC Specs
    Laptop (Model)Yeah, right.. :P
    MotherboardROG STRIX B450-F GAMING
    ProcessorRyzen 5 3600X 6-Core Processor
    Memory (part number)KHX3200C16D4/8GX
    Graphics Card #1ASUS 2060 Super ROG STRIX ADV
    Sound CardKingston HyperX Cloud II USB dongle
    MonitorAOC 2470W & AOC 2460
    Storage #1KINGSTON SA2000M81000G
    Storage #2Samsung SSD 860 QVO 1TB (x2)
    CPU CoolerCooler Master Hyper 212 Evo (Corsair ML 120 fan)
    CasePhanteks Eclipse P400S Satin Black
    Power SupplyCooler MAster MasterWatt 650 Bronze
    Keyboard Corsair K95 RGB Platinum Brown
    Mouse Corsair Nightblade RGB
    Headset Kingston HyperX Cloud II
    Mouse Pad Steelseries XXL
    OS Windows 10 Pro
    Network RouterZyxel P8702 (ISP provided)
    Accessory #1 USB 3.0 hub 4-way
    Accessory #2 Thrustmaster Flight HOTAS X

    Join Date
    Dec 2019
    Reputation
    10
    Posts
    12

    Well, I have done enough overclocking to know that you shouldn't put in any overclocks or change voltage before installing OS. I have learned to wait until after OS, updates and drivers are installed before I start with any OC. With that said I don't know about your board but I leave everything as it is with BIOS updated. For good measure maybe clear CMOS (my board got a little weird after I updated BIOS until I cleared CMOS).

    What I would do if I were you is remove cables from hard drives/SSD and disconnect any M.2 you are not gonna install Windows on before proceeding to install.

    After install make sure the PC runs OK and I have a little habit after installing OS and drivers. Not always will Windows install perfectly so I advice to do this.

    Open Command Prompt as administrator (just open start menu and search for cmd) remember choose the option with administrator priviligies.
    Enter command: SFC /SCANNOW and let it scan, this will scan critical system components in Windows. I do this after Windows is installed and again after I installed all drivers. If result is did not find any integrity violations then install should be OK, if SFC find some bad files it will download and replace as needed.


    Well that was that, as for your TV. What do you connect to it? HDMI/display port/etc? Are you selecting the correct input (HDMI 1 or HDMI 2 etc) or do you have any adapter connected to the display cable?

  2. #12
    New ROGer Array
    Join Date
    Feb 2020
    Reputation
    10
    Posts
    9

    Hi everyone*
    I finish my system in easy *my it was in tow thing*
    1- the update of bios
    2 - I was have bad ram 4x8gb corsair I found 2 its die*
    My advice :
    don’t think if you get new hardware thats mean its good 100% its better u test it first.
    another think build u system out the case and test it first .
    Don’t instal all the ram use just one .
    Instal just one HD ot SSD or M.2 which one u want instal in it the OS *don’t ever instal all of them together.
    I hope in this advice I help someone
    thx for all
    rely u advice help me so much *

  3. #13
    ROG Guru: Orange Belt Array
    Join Date
    Feb 2019
    Reputation
    67
    Posts
    260

    This is why any build I do, before it goes in the chassis I put the motherboad on the box it came in and get it up and running first.

  4. #14
    New ROGer Array
    Join Date
    Feb 2020
    Reputation
    10
    Posts
    9

    you right this it’s better than you but in case and removed.
    *

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •