CH7 X470 won't boot but works with override ! $200 board can't even boot properly

[roshanx]

Hello,
As the title suggests, I made a new rig recently but windows won't boot unless i enter bios and overrides the ( Windows partition manager ) OR i press F10.
The Asus Logo screen sits calmly - Qcode 92, from there i have an option to enter Bios to manually override or I can press F10 , and then windows boot normally and the computer would run smooth from there, no other problems.



SPECS --
Ryzen 5 3600
Asus CH7 X40 WIFI
16GIGS RAMS
3x SSD
2x HDD

P.S = WIndows is UEFI GPT

Things i have tried -------------------------
1. Reinstalling windows
2. Bios boot settings
3. Reset Bios

[Mordorr]

Whats the FW?

[roshanx]

Whats the FW?

What is FW? :/

[Mordorr]

Firmware. In this case of your board....

[Baio73]

Try to unplug all SSD's and HDD's except the OS one and see if it works.
If not, try to reinstall Windows with this configuration.

Baio

[roshanx]

Firmware. In this case of your board....

Previously it was 2901, then after updating to latest 3001, still the same issue persist.

[roshanx]

Try to unplug all SSD's and HDD's except the OS one and see if it works.
If not, try to reinstall Windows with this configuration.

Baio

Here is the Update !!

I tried Windows reinstall with just primary SSD, but nothing same effect. Even after updating Bios to the latest 3001.
What's more?

I found out that this time i would get two types of Q-Code, 98 and 99 as opposed to 92 Previously.
I started deatching connected device on the Back i/O panel and kept testing.
I have found the weird fix somehow.
If i disconnect the Keyboard, and let all other usb devices remain connected, it would boot straight to windows without any halts on post.

Now the question is what is the ultimate fix ? Because i have been having computers since 20 years and never faced this kind of an issue with other rigs. Please help guys!

[Baio73]

Here is the Update !!

I tried Windows reinstall with just primary SSD, but nothing same effect. Even after updating Bios to the latest 3001.
What's more?

I found out that this time i would get two types of Q-Code, 98 and 99 as opposed to 92 Previously.
I started deatching connected device on the Back i/O panel and kept testing.
I have found the weird fix somehow.
If i disconnect the Keyboard, and let all other usb devices remain connected, it would boot straight to windows without any halts on post.

Now the question is what is the ultimate fix ? Because i have been having computers since 20 years and never faced this kind of an issue with other rigs. Please help guys!

Happy to know you found the problem!
Usually it's a good idea to install Windows with a minimum set of devices connected to the pc, either inside than outside the case.
But a keyboard is something one is supposed to have connected to install an OS.
What keyboard are we speaking of?
Can you try another keyboard?
What other USB devices do you have?

Baio