Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 46

Hybrid View

  1. #1
    New ROGer Array Kid_Creation's Avatar
    Join Date
    Mar 2020
    Reputation
    10
    Posts
    20

    Help installing Windows 10 on ROG Strix GL10CS

    I am putting a new HD into my pc and need help installing Windows 10. I have created the USB bootable with Fat32 correctly and disabled security but there is no options on my bios to disable CSM Support. So my pc never boots to the USB for installation. Someone please help me with info on how to install Windows 10.

  2. #2
    Super Moderator Array
    Join Date
    Jan 2013
    Reputation
    121
    Posts
    2,250

    Welcome to the forums!

    The 'Launch CSM' setting would be used for Windows 7, so you don't need to worry about it for Windows 10 and it's not the reason your bootable USB drive isn't working.

    You can either tap 'F8' after you power on to see the boot menu and select your bootable USB drive or enter the bios to change the boot order if you haven't already.
    Last edited by cl-Albert@ROG; 03-31-2020 at 05:55 PM.

  3. #3
    New ROGer Array Kid_Creation's Avatar
    Join Date
    Mar 2020
    Reputation
    10
    Posts
    20

    Quote Originally Posted by cl-Albert View Post
    Welcome to the forums!

    The 'Launch CSM' setting would be used for Windows 7, so you don't need to worry about it for Windows 10 and it's not the reason your bootable USB drive isn't working.

    You can either tap 'F8' after you power on to see the boot menu and select your bootable USB drive or enter the bios to change the boot order if you haven't already.

    Done that. I even installed Windows 10 from the same usb device on a different Asus PC without any problem. I held esc and chose the boot device - held F2 went into bios and launched from boot menu and yes I have made the USB the first boot device. It just keeps ignoring it.

  4. #4
    Super Moderator Array
    Join Date
    Jan 2013
    Reputation
    121
    Posts
    2,250

    Quote Originally Posted by Kid_Creation View Post
    Done that. I even installed Windows 10 from the same usb device on a different Asus PC without any problem. I held esc and chose the boot device - held F2 went into bios and launched from boot menu and yes I have made the USB the first boot device. It just keeps ignoring it.
    Notebooks use 'ESC' for the boot menu, but desktops use 'F8', so if you want to see the boot menu, use 'F8', but you can just set the boot priority in the bios too.

    If the boot menu and bios recognize your USB drive, it could be that no hard drives are detected by the system, or Windows doesn't recognize the partitions (you didn't have Linux on there before did you? You may need to delete all the partitions or reformat the hard drive to NTFS and try it again).

    You can check your hard drive in the bios under the 'advanced' menu to make sure it's detected, otherwise, re-check the cables and the drive, or maybe stick back your original hard drive to confirm the USB drive boots in this situation at least (you can just quit the installation at this point of course and try to figure out what is going on with your other hard drive).
    Last edited by cl-Albert@ROG; 04-01-2020 at 05:40 PM.

  5. #5
    New ROGer Array Kid_Creation's Avatar
    Join Date
    Mar 2020
    Reputation
    10
    Posts
    20

    Let me start form the begining.

    OK let me start from the beginning.
    My PC hit the blue screen of death out of no where.
    I wasn't doing any editing on my videos software or anything major.
    I was just watching netflix.
    I am not sure if a windows update had just happened and caused it to crash or not.
    But it just kept looping blue screen.
    These are the Stop codes that I received.
    And I have googled all of them and since most of them need you to get into windows to run scan disk checks and memory diagnostics, I can't fix them. Becuase I can't get into windows or even in safemode of windows.
    Stop code:
    KERNEL MODE HEAP CORRUPTION
    SYSTEM THREAD EXCEPTION NOT HANDLED
    SYSTEM PTE MISUSE
    KERNEL SECURITY CHECK FAILURE
    DRIVER IRQL NOT LESS OR EQUAL
    PAGE FAULT IN NON PAGE AREA
    PFN LIST CORRUPT
    MEMORY MANAGEMENT
    Wdf01000.sys
    usx01000.sys

    So I removed my Hard Disk all together and put a new one in and tried to install a fresh copy of windows 10
    I use Rufus 3.9
    Partition scheme GPT
    Target system UEFI (non CSM)
    File system Large FAT32
    I used the same USB disk to install a fresh copy of Windows on my ASUS laptop with no problem.
    So I know it works.

    Like I said I have the ROG STRIX GL10CS. It is a tower and not a laptop.
    I have removed the RTX video card to get to the bios battery to remove it and uplug the pc to hold the power button for 30 seconds. I have removed all peripherals and tried to boot up that way. I have tried with secure boot disabled. Fast boot disabled. I have tried every geek trick in the book that I know and could find on google. And now I have been without my pc for a week. Not to happy I had to wait 24 hours just to use this forum, but I am hoping someone has some info that may help. Thanks

    Click image for larger version. 

Name:	IMG_20200402_041551.jpg 
Views:	6 
Size:	171.4 KB 
ID:	84445
    Click image for larger version. 

Name:	IMG_20200402_041656.jpg 
Views:	2 
Size:	162.4 KB 
ID:	84446
    Click image for larger version. 

Name:	IMG_20200402_041701.jpg 
Views:	1 
Size:	139.1 KB 
ID:	84447
    Click image for larger version. 

Name:	IMG_20200402_041710.jpg 
Views:	1 
Size:	122.6 KB 
ID:	84448
    Click image for larger version. 

Name:	IMG_20200402_041728.jpg 
Views:	1 
Size:	133.9 KB 
ID:	84449
    Click image for larger version. 

Name:	IMG_20200402_041752.jpg 
Views:	1 
Size:	137.3 KB 
ID:	84450
    Click image for larger version. 

Name:	IMG_20200402_041826.jpg 
Views:	1 
Size:	85.9 KB 
ID:	84451

  6. #6
    ROG Guru: Orange Belt Array raju2529 PC Specs
    raju2529 PC Specs
    Laptop (Model)R542UQ-DM153 ( X542UQ.309SA )
    MotherboardAsus Builtin Motherboard X542UQ
    ProcessorIntel core i5 7200u @2.5Ghz
    Memory (part number)Adata 2400 Mhz 16GB DDR4
    Graphics Card #1intel HD 620 graphics 1GB DDR3 DCH WHQL driver v27.20.100.9316
    Graphics Card #2Nvidia GeForce 940MX 2GB GDDR5 DCH WHQL driver v27.21.14.6589
    Graphics Card #3nil
    Graphics Card #4nil
    Sound CardRealtek HD Audio controller with codec ALC294 WHQL driver v6.0.9132.1
    MonitorBuiltin Lcd monitor model BOE
    Storage #1Samsung 850 Evo 1000GB SSD M.2. 2280
    Storage #2Seagate 2TB 2.5inch 5400rpm and Seagate 2TB 2.5inch 5400rpm2.5 inch
    CPU CoolerBuilt-in
    CaseFrom factory
    Power Supply65W
    Keyboard Built in keyboard
    Mouse Built in mouse
    Headset Purchased Philips HeadSet
    Mouse Pad nil
    Headset/Speakers Realtek Builtin Speakers
    OS Windows 10 Enterprise 64bit v21H1 build no 19043.899
    Network RouterNextVision ONU Fiber Modem
    Accessory #1 G40 Wired Gaming Mouse
    Accessory #2 Laptop Cooling table with fan
    Accessory #3 Secureye Usb finger print scanner added seperately for Windows Hello
    raju2529's Avatar
    Join Date
    Feb 2018
    Reputation
    9
    Posts
    347

    use rufus 3.9 software , but choose format as NTFS , not fat32 , keep UEFI mode.

    in bbios , disable secureboot , keep fastboot disabled , save and exit .
    go to boot menu , choose uefi pendrive , click to proceed..

    if you not formatted old windows , then boot with same usbpendrive, choose repair , go to command prompt ,
    type notepad.exe
    click open
    browse below location
    C:\windows\system32\drivers\

    at bottom choose all files in notepad

    now find acpi.sys

    click to delete that file , once deleted means , conform it agian .

    then remove usbpendrive , boot as normal .if windows is successfully booted , after i will give some settings to do


    if windows is already fomatted means,
    go to boot menu , choose uefi pendrive , click to proceed., install the windows as normal method.

    i waiting for your reply .

    one two methods are , those are advanced , only few users will use , including me
    Last edited by raju2529; 04-05-2020 at 02:37 PM.

  7. #7
    New ROGer Array Jesseinsf PC Specs
    Jesseinsf PC Specs
    Laptop (Model)N/A
    MotherboardASUS ROG Maximus XI Extreme (Z390)
    ProcessorIntel Core i9 9900K
    Memory (part number)Corsair CMW128GX4M4E3200C16 - 128GB (4x32)
    Graphics Card #1NVIDIA - GeForce RTX 2080 Ti FE
    Sound CardCreative Labs Sound Blaster AE-9
    MonitorMSI Creator PS321URV (32 in 4k HDR600)
    Storage #1Samsung 980 Pro M.2 PCIe SSD 1TB
    Storage #2Samsung 970 Pro M.2 PCIe SSD 1TB
    CPU CoolerLian Li Galahad 360 (3x Uni fan SL120)
    CaseLian Li PC-011 Dynamic XL (ROG Certified)
    Power SupplyCooler Master V1200 Platinum
    Keyboard RAZER HUNTSMAN ELITE - LINEAR OPTICAL SWITCH (Red) w/ PBT Keycaps
    Mouse Razer Basilisk Ultimate with Charging Dock
    Headset Bowers and Wilkins P9 Signature
    Mouse Pad Razer Vespula V2 Mousepad
    Headset/Speakers Vanatoo Transparent One Encore w/ Rel HT/1003 Subwoofer
    OS Windows 10 Pro for Workstations
    Network RouterROG Rapture GT-AC5300
    Accessory #1 Microsoft Xbox Elite Wireless Controller Series 2
    Accessory #2 2x Logitech BRIO ULTRA HD PRO WEBCAM
    Accessory #3 7 Uni Fan SL120 fans for PC case
    Jesseinsf's Avatar
    Join Date
    Mar 2019
    Reputation
    34
    Posts
    304

    Don't disable Secure Boot

    Quote Originally Posted by Kid_Creation View Post
    I am putting a new HD into my pc and need help installing Windows 10. I have created the USB bootable with Fat32 correctly and disabled security but there is no options on my bios to disable CSM Support. So my pc never boots to the USB for installation. Someone please help me with info on how to install Windows 10.
    Don't disable secure Boot unless the Wim file is over 4GB. If you had the Windows 10 Media creator make your USB install media then no need to disable secure boot. If you downloaded windows 10 from elsewhere then use Rufus. Rufus will let you know if secure boot needs to be temporarily turned off. Whatever you do, do not turn on CSM unless you have ancient boot devices or you are booting in to a DOS environment. If you want to dual boot then you can tell secure boot to other OSes instead of just Windows.

    CSM settings are usually in the Boot menu.

  8. #8
    Super Moderator Array
    Join Date
    Jan 2013
    Reputation
    121
    Posts
    2,250

    Thanks for the details.

    May need to study and think about your post more, but don't have a lot of great ideas, so hopefully we can get more suggestions from others.
    Feel free to ignore me if you're not interested in discussing more with me, or also feel free to let me know if you want to talk about anything more.

    Anyway, noticed your last screenshot listed the "FNK TECHUSB Card Reader" and if this is a USB card reader and your boot device wondering if you have a 'normal' USB drive to use instead even if it works on another notebook just to check this.

    Also, if you didn't already know, you can download the Windows 10 media creation tool from Microsoft's website and create a bootable USB drive with a different computer if available.
    https://www.microsoft.com/en-us/software-download/windows10


    These things may not make any difference, but a couple things that are different from the procedure that works for me if you want to look into that or wait for more feedback.

    Also, your last 3 screenshots show a Windows Boot Manager which should not show up if your hard drive is blank as far as I know, so assume you took them when your original bluescreening hard drive was connected rather than your new hard drive?
    Last edited by cl-Albert@ROG; 04-02-2020 at 12:17 AM.

  9. #9
    Super Moderator Array
    Join Date
    Jan 2013
    Reputation
    121
    Posts
    2,250

    By the way, if you want to work on your bluescreening hard drive more, you can create a bootable USB recover/repair drive if you have another computer running the same Windows version which will hopefully help you get into safe mode.
    Below are a couple websites about it and you may want to look for more if necessary although wondering if you will still have that problem to boot to USB or not.

    https://www.pcworld.com/article/3140449/everything-you-need-to-know-about-windows-10-recovery-drives.html

    https://www.tenforums.com/tutorials/...dows-10-a.html

  10. #10
    New ROGer Array Kid_Creation's Avatar
    Join Date
    Mar 2020
    Reputation
    10
    Posts
    20

    I had hopes on the recover drive working. But no luck..

    Quote Originally Posted by cl-Albert View Post
    By the way, if you want to work on your bluescreening hard drive more, you can create a bootable USB recover/repair drive if you have another computer running the same Windows version which will hopefully help you get into safe mode.
    Below are a couple websites about it and you may want to look for more if necessary although wondering if you will still have that problem to boot to USB or not.

    https://www.pcworld.com/article/3140449/everything-you-need-to-know-about-windows-10-recovery-drives.html

    https://www.tenforums.com/tutorials/...dows-10-a.html
    I tried this. It took a while to get it created. In the mix of formating my USB over and over again with the Rufus and the Media creation tool, some where along the line it crashed. So I had to use the MiniTool Partition Wizard to fix it. And that took a two days. I had to DoD partition wipe that took 7 passes. LOL But I finally got it fixed and created the recover drive and still no go.

    In the mist of all this, I noticed you pointed out that windows boot was still there. And I was wondering how I had 128 gig drive still showing up, since I removed the 1T hd. Turns out it's one of those new M. 2 PCIe cards. Pic below. So now I am going to try to figure out how to wipe that drive and see if I can get windows installed on after that. I am reverting back to the old school Hirens disk to try. LOL Wish me luck. I will keep you posted to the progess. Thanks for helping.
    Click image for larger version. 

Name:	IMG_20200402_183150.jpg 
Views:	1 
Size:	178.8 KB 
ID:	84476
    Last edited by Kid_Creation; 04-05-2020 at 12:54 AM.

Page 1 of 4 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •