Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    May 2018
    Reputation
    10
    Posts
    2

    Rampage V Extreme - Anyone experience this?

    Greetings!

    I have used this build since Aug 2016 and it's been solid. Recently and randomly, the computer shuts itself down. When I power it back up, I get this error;

    CPU Fan speed error detected.
    Ensure to install the CPU fan properly on to the CPU_FAN header
    or adjust/disable the Fan Speed Low Limit option in UEFI.
    Press F1 to Run SETUP

    Sometime it would continue to shut itself off until I press the CMOS reset button. Once I'm able to enter BIOS and set the CPU Fan Speed Lower Limit to IGNORE, everything seems to go back to normal until it happens again.

    Just yesterday the system randomly shut itself off while sitting idle. This time I received the same error as before except it also had

    CPU Over Temperature Error!

    I pressed the reset CMOS button and entered the BIOS and set the CPU Fan Speed Lower Limit back to IGNORE and was able to start Windows again.

    I ran IntelBurn Test while monitoring with HWiNFO64 and the CPU temps get a little high because of the overclock, but it seems nice and stable.

    Has anyone else experienced this continuous / intermittent problem? Any thoughts or advice would be much appreciated!

    Rampage V Extreme - Bios version 3902
    i7-6900K - Corsair Hydro H110i
    GSKILL Ripjaws V - DDR4/2800 (8GBx4)
    EVGA GTX 1080
    950 Pro M.2 OS Drive
    EVGA SuperNOVA 1050 Watts
    Windows 10

  2. #2
    ROG Guru: Brown Belt Array davemon50 PC Specs
    davemon50 PC Specs
    Laptop (Model)Asus G752VY-DH72 (17") and Asus G752VT-DH74 (17")
    MotherboardAsus ROG LGA2011-v3 Rampage V Edition 10, x99 EATX
    ProcessorIntel Core i7-6950X Extreme 10-core 25MB Cache 3.0 GHz
    Memory (part number)Corsair Vengeance LPX Red DDR4 DRAM 64GB-4x16 3333 (CMK64GX4M4B3333C16R)
    Graphics Card #1Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Graphics Card #2Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Sound CardAsus SupremeFX Hi-Fi Audio DAC
    Monitor(2) Dell UltraSharp U2515H 25-inch monitors
    Storage #1(4) SSD's - Samsung 960 & 970 1TB M.2, Intel 535 480G, Intel 510 250G
    Storage #2(3) HDD's - Western Digital Caviar Black 2TB 3.5-in SATA III 64MB Cache
    CPU CoolerCorsair Hydro Series H80
    CaseCorsair Obsidian Series 650D Black, ATX, Mid Tower
    Power SupplyCorsair Digital AXi-Series AX1200i (1200W) 80+ Platinum Rating
    Keyboard Logitech Wireless K360
    Mouse Logitech Wireless MX Anywhere 2
    Headset HyperX Cloud II
    OS Windows 10 Pro 64-Bit
    davemon50's Avatar
    Join Date
    Apr 2017
    Reputation
    48
    Posts
    1,126

    i7-6900K - Corsair Hydro H110i

    You might need to reapply paste.
    Davemon50

  3. #3
    New ROGer Array
    Join Date
    May 2018
    Reputation
    10
    Posts
    2

    Quote Originally Posted by davemon50 View Post
    You might need to reapply paste.
    Thank you for the suggestion. I will give that a shot. But it is strange that it seems stable currently...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •