G20CB Gpu recommendations

[ShiftySummers]

Hi all,

Just got a GTX1660 Super single fan, that doesn't fit in my G20CB �� Too tall - its seams the height was 16.5cm - I take it i need a 15cm height card? Was looking at a RTX2060 mini itx - would that be a good fit.

Failing that - Founders GTX1070/1080 - depending on what i can get my hands on.

Any recommended gpus to go in? I have a gtx 980 atm, and both power supplies.. Amazon links helpful as I am returning it for credit

[Welsh Whoopee]

Hi all,

Just got a GTX1660 Super single fan, that doesn't fit in my G20CB �� Too tall - its seams the height was 16.5cm - I take it i need a 15cm height card? Was looking at a RTX2060 mini itx - would that be a good fit.

Failing that - Founders GTX1070/1080 - depending on what i can get my hands on.

Any recommended gpus to go in? I have a gtx 980 atm, and both power supplies.. Amazon links helpful as I am returning it for credit

hello and welcome to forums, yeah I have 2 that will fit. if their are tight, then fit the cards without the cage

https://www.amazon.co.uk/Gigabyte-Ge...1&rps=1&sr=8-3

https://www.amazon.co.uk/ASUS-GeForc...1&rps=1&sr=8-4

both will work on the 180w power brick, and both only take a 8pin I think, I know the turbo does.

hope this helps, if you need a quick reply then ask on one of my videos (welsh whoopee, youtube) videos are on the top of this forum section.

Whoopee

[ShiftySummers]

hello and welcome to forums, yeah I have 2 that will fit. if their are tight, then fit the cards without the cage

https://www.amazon.co.uk/Gigabyte-Ge...1&rps=1&sr=8-3

https://www.amazon.co.uk/ASUS-GeForc...1&rps=1&sr=8-4

both will work on the 180w power brick, and both only take a 8pin I think, I know the turbo does.

hope this helps, if you need a quick reply then ask on one of my videos (welsh whoopee, youtube) videos are on the top of this forum section.

Whoopee

If i dont use the cage, do I need any plate to hold the card from touching any other electronics?

[Welsh Whoopee]

If i dont use the cage, do I need any plate to hold the card from touching any other electronics?

no as their is nothing in that section for any issues to happen, check first before assuming you think you will not have to use it lol

cheers