[DRIVERS] Realtek Audio (Intel 2xx/3xx/4xx/5xx/6xx/7xx & AMD 3xx/4xx/5xx/6xx)

[DeZro]

Hey MoKiChU,

I got a Z490 Maximus Hero XII (WiFi) and installed the newest drivers (Realtek Audio Drivers (UAD - ASUS ROG SS3-DTS MB) ver. 6.0.9272.1 but I think that it doesn't installed properly. In device manager under Software components there is no DTS driver only A-Volute Nh3 and the other Realtek stuff. So many things don't seem to work like the Equalizer in the Sonic Studio 3 App. Forgot to mention, I installed it through the Gen2 BAT-File, maybe my Z490 is only Gen1 compatible ?

Thank for your work MoKiChU

[Moogle Stiltzkin]

what to download for Asus Strix X570-E Wifi II motherboard ?

[Ataemonus]

Quickly updated, thank you.

[Cliff S]

@MoKiChU already a new one again

[OsamaGhaly]

@MoKiChU Many thanks for the updates

I have ROG STRIX X470-F GAMING mobo but I'm facing two issues with the latest updates.

The first one when I try to open Sonic Studio 3 while playing any sound, it takes sometime then throw an error that this system is not supported .
And to solve this I have to restart NahimicService from the task manager or restart the system.

The second issue when I enable the Upmix/Surround option to have the sound out of all my 4 speakers; the sound quality then reduces dramatically.
That doesn't happen if I installed the mobo's support page drivers.

Note. I'm installing (Realtek Audio Drivers (UAD - ASUS ROG SS3 MB) from OP and also followed all the instructions carefully, even do clean install each time I update the drivers.

[Shocker]

I bought new headphone, and connected it to rear 3.5mm jack, but volume is very low, amplify level set to extreme level and impedance sensing about 700, what can i do to fix it?

edit: After couple of plugging/unplugging it is set to powerful, and ohms about 90, and i forgot headphone has it own volume, seperated from windows, whats the best setting to get maximum quality audio? to raise headphone volume or windows?

[rgen44]

Hi everyone,

- Realtek Audio Drivers (UAD - ASUS TUF/PRIME DTS HPXv1 MB) :

Drivers : 6.0.9279.1 WHQL [07/12/2021]

Thread updated.

Thank you @MoKiChU. You are appreciated. STAY WELL!

[bajs2020]

I have ROG Strix B550-E which one should I download?
Windows 10 is not able to find Realtek audio at all even after I downloaded the latest driver.
in device manager it only shows "High Definition Audio Device"

[OsamaGhaly]

Hi,

You have an ASUS ROG SS3 motherboard, so :

You need Realtek Audio Drivers (UAD - ASUS ROG SS3 MB) Gen1 or Gen2 (Recommended) from the first post of this thread.

- Follow scrupulously your CLEANUP process.
- Use this SS3 Cleaner tool (Right click on "A-Volute_SS3_Cleanup.exe" > Run as administrator) then restart your PC
- Follow scrupulously your INSTALL process.
- For the next drivers packages that I would release, you will can directly follow your UPDATE process.

Also, to avoid ZoneID blocking trouble :

- For each downloaded .zip : ZoneID unblock the .zip (Right click on the .zip file > Properties > Check the box Unblock > OK).

or

- Disable the ZoneID blocking completely (you will no longer have to unblock each downloaded .zip) :

- Right-click Windows Start button then click Launch then type gpedit.msc > OK
- User Configuration > Administrative Templates > Windows Components > Attachment Manager
- Do not preserve zone information in file attachment : Enabled > OK.

Many thanks @MoKiChU, I think the "A-Volute_SS3_Cleanup" file did the trick with the SS3 launch error and it's now works flawlessly.
But for the second issue, I still feel sound quality reduction if I enabled the "Upmix/Surround option". but that's OK I won't enable it for now, hoping there will be fix with the upcoming driver updates.

Thanks again dear .. wishing you a great day

[bajs2020]

Hi,

You have an ASUS ROG SS3|DTS Sound Unbound motherboard Gen1, so :

You need Realtek Audio Drivers (UAD - ASUS ROG SS3-DTS MB) Gen1 or Gen2 (Recommended) from the first post of this thread.

Follow scrupulously your CLEANUP process then your INSTALL process, for the next drivers packages that I would release, you will can directly follow your UPDATE process.

Thank you so much for the info
but my installation process seems to have stopped at

Microsoft PnP Utility

Processing inf : dtsapo4ultraAsusextensionpkg.inf