[DRIVERS] Realtek Audio (Intel 2xx/3xx/4xx/5xx/6xx/7xx & AMD 3xx/4xx/5xx/6xx)

[andehhh]

Thanks for sharing this!

I tried it out but unfortunately the Realtek driver isn't working on the Asus B450-I - no audio

[m4ttjirm]

I'm having to run the mic volume and boost to max to get my mic sound ok with the current drivers on my z490-g. Will it help to update to these? Or should i wait for the official release?

Do you have an RTX graphics card by any chance? If you do, google "RTX Voice". I am running that on my z490-g with no issues. Loud and clear for everyone

[cerenbjk]

Hello, Maximus XI Extreme , I installed ASUS ROG/PRIME/TUF RTK motherboards but no sound anymore. I have no realtek audio right now in my apps.

[piratino]

Hi,

No, follow scrupulously your CLEANUP process then INSTALL process, for the next drivers packages that I would release, you will can directly follow the UPDATE process.

Note (in order to choose correctly the install/update process to use) : You have a ASUS ROG SS3 motherboard.

Fantastic! Everything works!! Thanks again!

[Cezarycezary777]

Hi MoKiChU.
In DriverMax is showing new Realtek audio driver: 6.0.8967.1. Do you now anything about?

[Cezarycezary777]

Thanks for quick advise.

[BillBittel]

Hi MoKiChU,

I have a Maximus X Hero Wifi. I found an earlier post in this thread that says I need Realtek Audio Drivers (UAD - ASUS ROG/PRIME/TUF). So I think this is a ASUS ROG SS3 motherboard. Can you please confirm this?

I also have an X99 Deluxe II which will not send audio over HDMI to my display speakers. Asus support page for this board has Realtek drivers from 2016 (REALTEK HM_TUF V6.0.1.7848). Owners Manual says "Realtek® ALC1150 8-channel high definition audio CODEC featuring Crystal Sound 3".

Can you please tell me what drivers I need for this board?

Thank you in advance. It is nice to have you back!

[BillBittel]

Hi,

You need Realtek Audio Drivers (UAD - ASUS ROG/PRIME/TUF MB) from this thread. Follow scrupulously your INSTALL process with cleanup step, for the next drivers packages that I would release, you will can directly follow the UPDATE process.

Note (in order to choose correctly the install/update process to use) : You have a ASUS ROG SS3 motherboard.



You need Realtek Audio Drivers (HDA - ASUS ROG/PRIME/TUF) from my HDA drivers thread. Follow scrupulously your INSTALL process with cleanup step, for the next drivers packages that I would release, you will can directly follow the UPDATE process.

Note (in order to choose correctly the install/update process to use) : You have a ASUS PRIME DTS Studio Sound motherboard.

Thank you very much for you guidance. Hopefully doing a clean driver update will solve my no audio over HDMI to monitor issue. Fingers crossed!

[BillBittel]

Audio via HDMI has nothing to do with the Realtek Audio drivers dedicated to your motherboard, Audio via HDMI is managed via the Audio drivers of your graphics card.

Yes now that you mention it - don't know what I was thinking. Will will update them anyway then go after the GPU. Thanks.

On the Max X Hero Wifi, I uninstalled all the indicated drivers. I don't really use the Sonic stuff so tried to do the manual install of RealTek Audio Console through your link which takes me to the Windows Store. When I try to download it, I get and error. If I select details it says Something unexpected happened and gives me the option to report it. Tried several times. I will try running your Install_ROG_SS3.cmd file and see if that works. I can always delete Sonic Radar III and Sonic Studio (I hope).

update - Ran Install_ROG_SS3.cmd which seemed to run ok - it rebooted. After reboot there was no RealTek Audio Console and no Sonic apps. So I tried the Realtek manual link to the Windows Store and this time it downloaded. Downloaded Sonic Studio too but not Sonic Radar. Now when I run RealTek Audio Console I get a spinning wheel for awhile then it says "Can not connect to RPC service". Sonic Studio III seems to work OK. I don't know what the problem is with RealTek Audio Console. Google search says check that Realtek HD Audio Universal Service, DCOM server process launcher, Remote Procedure Call (RPC), and RPC Endpoint manager services are running - they are.

[BillBittel]

I will be honest with you, I plan to give up on what I do, the closing of one of my threads by the moderators and the bias by the moderators towards a **** troller has something to do with it, I would no longer be here, the time to think about all of that, but I will most likely drop all and ****ed up all, so make backups of what you need.

Wow - I hope this is not because I am having some difficulty with the driver updates and asking for your input. It looks like somehow I have the HD drivers installed instead of the UAD drivers. I will figure it out. Please don't abandon this because I screwed up a driver update. There are many people on this forum (myself included) that REALLY appreciate what you do. I won't trouble you with this again. Thanks for all your help.