03-15-201206:30 AM - last edited on 03-06-202409:09 PM by ROGBot
Please HELP.
I received my new R4E board yesterday with 2 x vertex 3 SSD's. I have followed the post on setting up the RAID config on the mb. Perfect. Then created a raid setup with crl-I. Perfect.
Then as I exit the raid setup the pc locks up on the boot screen. If I press del to enter the Bios nothing happens.
Rebooted the pc. Pressed del to enter the bios. Pc loaded the raid setup. Still pressed del to enter. Pc lock. Nothing is happening. If I press crl, alt & del the pc would not reboot. Still code error 62 on mb.
HiViz, I think the op can't even go in the BIOS, Maurice , try first to press the button at the back of the board for few secondes to see if you can go in the BIOS and proceed with the instructions of hiViz
I get as far as installing the raid setup perfectly. Then as it leaves the raid setup screen back to the rec ROG screen the PC locks up for 5min before returning to the bios screen.