05-14-2020 12:15 AM - last edited on 03-05-2024 08:01 PM by ROGBot
05-14-2020 04:10 AM
05-14-2020 12:53 PM
05-17-2020 11:55 PM
Veovis wrote:
Oh sweet thanks. Ill see if I can get new tubes since it's only affecting the led's on the heatsink.
As for armory crate and Gpu Tweak? The aura engages for the GPU in Armory crate (despite being unchecked before a crash) and the two programs fight to display. Causing the card to strobe between the two settings.
05-19-2020 12:34 AM
MasterC@ASUS wrote:
Do you mean Armoury Crate and Aura are causing a conflict? GPU Tweak II doesn't offer lighting controls. What do you mean by 'causing the card to strobe between the 2 settings'?
Armoury Crate and Aura shouldn't cause a conflict, Crate has priority over Aura.
05-22-2020 01:20 AM
MrAgapiGC wrote:
ok. well you have a unique card in the planet.
TI am going to write what is what is the true of what is going on.
the Strix has 3 leds, 2 where the fans are. 1 on the backplate. If you have these effect is physical's issue. the happens causes the tubes are dry get yellow can get crack cause by heat.
Read the following lnk, so you can get and change the tubes in the fan plastic that goes direct to the 2 ONLY leds on the card where are the fans are.
https://rog.asus.com/forum/showthread.php?99996-Strange-issue-with-1070-Strix-RGB-LEDs/page6
Regarding the armory Crate and the gputweak. you care running the aura control of the gpu (stant alone app?) As far there is no issue with both apps. running perfect
05-27-2020 05:59 PM
MrAgapiGC wrote:
I am running ONLY the Armory Crate. The gpu stand alone is a very small version of the regular aura, that is part of the Armory crate Hall system. Even that looks to runn fine eventually will crash. But remember and these is a non tech recommendations. Even that i do not run my apps like that, remember to disable the sync in the armory crate. the Armory Crate is still on works. and I am taking all test possible to ensure Asus gets the correct data and information. As today, GPUs in Armory crate, see the lights as a extension of the 12v system. Unsync the card will breath red. sync will react to the 12v line, in other words, will change color as 1 line both fan and backplate. If in the future, gpus get 2 or more zones on the 5v ARBG more control will get. but that is a future that will be check to see.
If you use the Armory Creator, The control has to be done in armory crate.
05-28-2020 12:21 PM