Results 1 to 4 of 4
-
05-19-2020 01:33 PM #1
- Join Date
- May 2020
- Reputation
- 10
- Posts
- 2
Asus Strix B450-E nvme raid issue
hey,
i have an odd issue where my M.2 drivers to not appear in raidexpert in windows, and in device manager the two drives appear individually, and not as a raid array like my 4x sata drives (that are in raid)
The boot drive is GPT UEFI, so that i have the raidexpert options available in bios.
I can set up the raid in bios, but it does not carry through to windows as described above.
the AMD CBS menu is greyed out in bios, but the raid expert menu is there, so go figure.
both NVME and SATA is set as raid in sata configuration under chiptset.
I've installed the sata raid drivers initially, when setting up the sata raid (used for backup of my nvme content before attempting the raid in the first place)
the current storage config is:
4x sata ssds in raid
2x m.2 nvme supposed to be in raid
another m.2 nvme in pci-express 3.0 x4 adapter with OS
any ideas?
i did not do any screenshots when i first attempted this, but if needed, i can redo it all for documentation and clarification.
-
05-20-2020 03:09 PM #2
AS185 PC Specs Motherboard Zenith Extreme Processor AMD Threadripper 1950X Memory (part number) 4 x G Skill F4-3200C16D-32GTZKW @ 3200MHz Graphics Card #1 Nvidia Titan RTX Monitor Samsung Odyssey G5 LC34G55T Storage #1 6 x PNY 2TB XLR8 CS3030 Storage #2 3 x 1TB Crucial MX500 CPU Cooler Thermaltake Water3.0 Ultimate Case Corsair Obsidian 900D Power Supply Cooler Master MasterWatt Maker 1200W Keyboard Razer Ornata Chroma Mouse Razer Mambe TE / Logitech USB TrackMan Wheel Mouse Pad steelseries Cyberpunk 2077 edition Headset/Speakers Onkyo HT-S3910 OS Windows 10 Home x64 Accessory #1 Asus Hyper M.2 X16 Card V2 Accessory #2 Asus DIMM.2 card in slot Accessory #3 KingMod Corsair 900D Silencing Kit
- Join Date
- Feb 2020
- Reputation
- 21
- Posts
- 140
I checked your motherboard manual thoroughly.
First things first. Did you install all the necessary drivers for raid during the Windows installation process? I see that you have the operating system on a separate nvme SSD in the adapter. If so, I believe there is a way to initiate from Windows the raid established from BIOS. You will need to install an AMD raid software & AMD raid installer to initialize AMD RaidXpert2. All this from AMD's website. I've been reading that there are problems with this RaidXpert2 application. It looks complicated to get it all running too. I won't be able to help you out if that's the case.
Anyways, if this is the problem and you can't solve it, no worries! You can always install the operating system first on the nvme raid and then just hook up the nvme adapterI have mine system setup like that. Unfortunately, the AMD StoreMI is also not working properly on my operating system. AMD is supposed to release this year a new enhanced application. Hopefully, by then, most issues should be resolved.
-
05-26-2020 12:17 PM #3
- Join Date
- May 2020
- Reputation
- 10
- Posts
- 2
hey!, i dont know why i didnt get a notification that you responded, but thank you very much for that
I did install the drivers, but i am also running 4xSSDs in raid0 - i've read that the board can have issues running both SSD and NVME raid at the same time.
I had the SSD raid to be able to back up the two 1TB NVME drives before putting them in raid.
I just bought an external 4TB disk to use as backup, so i will try without the SSDs configured as raid (and disconnected) on a fresh windows install - hopefully that will solve the problem. Backing up with 100mb/s to the HDD, as opposed to the 2000mb/s to the ssd raid kinda sucks, but hopefully i can get both working eventually.
Windows is running off the pcie card on a 500gb evo 970 nvme - so that one is not affected by the raid.
I will let you know how it goes, also - with all the new CPUs coming out, hopefully we will get new bioses soon.
-
05-27-2020 11:03 PM #4
xeromist PC Specs Laptop (Model) Intel NUC laptop LAPQC71D Motherboard ROG Crosshair VIII Dark Hero Processor AMD 5800X Memory (part number) 32GB G.Skill Ripjaws V 3600 Graphics Card #1 ROG Strix RTX3090Ti Sound Card Sound Blaster Z Monitor AORUS FV43U Storage #1 Samsung 970 Pro 512GB CPU Cooler Custom loop Case BeQuiet Dark Base Pro 900 V2 Power Supply Corsair HX1000 Keyboard ROG Strix Flare II Animate Mouse ROG Chakram X Headset Steelseries Arctis Pro Wireless Mouse Pad ROG Scabbard Headset/Speakers Logitech z906 5.1 Network Router pfSense/OPNsense
- Join Date
- Jul 2010
- Reputation
- 436
- Posts
- 8,615
At the top of every thread there is a drop down for Thread Tools. That gives you the option to subscribe. You can also adjust subscription settings in your profile options to auto subscribe when you reply and whether you want an email or forum notification.
* Support disease research with Folding@Home *
< < < Click the drop-down above my avatar for my PC specs!