cancel
Showing results for 
Search instead for 
Did you mean: 

ROG SPATHA Update bricked

Galaxis
Level 7
Hello ROG
After updating the mouse firmware in wired mode,
this one went wrong.

Since then, the mouse connection has been recognized in
USBDeview as a HID Human Interface Device
and in the device manager of windows 10 64bits
as a USB input device.
Respectively: USB\VID_12CF&PID_0036\5&2D041557&0&14.

I tried various forum posts regarding this mouse,
but nothing helps it did not detect by any of the versions of ROG Armory 1.01.xx, 1.02.xx, 2.04.xx 2.06.xx 3.00.xx and latest 3.00.44).
I even tried to disconnect the battery but it also does nothing.

Firmware versions of the official asus website:
SPATHAMouseFirmwareUpdate_V80 does not work unable to detect update keys
and ROG_SPATHA _Mouse_FW1.62 (Beta) does not detect any mouse.

When connecting in wired mode it flashes once then nothing.

The station seems to work well but does not detect any mouse.

My configuration: Galaxis PC Specs.

you have a solution or a suggestion for troubleshooting please inform me I am completely lost.
Lag

RE: what is this USB\VID_12CF&PID_0036\5&2D041557&0&14 ?
nothing in the web.
Please...

RE :
Hello
After several searches on the sites on VID_12cf&PID_0036
I learned that it would be a Dexin Corp VID USB / 12cf_ driver
on the other hand for the PID there is no correspondence.
Dexin CORP.
ThermalTake.

1 ) Can bluff the software to send the firmware to the mouse ?
2 ) Is it possible to programming a pilot to resuscitate it ?

thanks.
Box ROG Helios | ROG Thor 1200p
Maximus XII Formula | Cpu I9 10900ka + ROG Ryujin 360
Ram Gskill DDR4 F4-4600C18D 2x8Gb
M.2 980Pro 512G W10_64 | SSD 870 QVO 4T
CG Asus ROG-STRIX-RTX 3080 TI O12G, Asus VG278HR, Benq EL2870U
Logitech K G915 + M G903 + T G Powerplay + H G935
3,915 Views
9 REPLIES 9

HappyBerryTeddy
Level 7
Galaxis wrote:
Hello ROG
After updating the mouse firmware in wired mode,
this one went wrong.

Since then, the mouse connection has been recognized in
USBDeview as a HID Human Interface Device
and in the device manager of windows 10 64bits
as a USB input device.
Respectively: USB\VID_12CF&PID_0036\5&2D041557&0&14.

I tried various forum posts regarding this mouse,
but nothing helps it did not detect by any of the versions of ROG Armory 1.01.xx, 1.02.xx, 2.04.xx 2.06.xx 3.00.xx and latest 3.00.44).
I even tried to disconnect the battery but it also does nothing.

Firmware versions of the official asus website:
SPATHAMouseFirmwareUpdate_V80 does not work unable to detect update keys
and ROG_SPATHA _Mouse_FW1.62 (Beta) does not detect any mouse.

When connecting in wired mode it flashes once then nothing.

The station seems to work well but does not detect any mouse.

My configuration: Galaxis PC Specs.

you have a solution or a suggestion for troubleshooting please inform me I am completely lost.
Lag

RE: what is this USB\VID_12CF&PID_0036\5&2D041557&0&14 ?
nothing in the web.
Please...

RE :
Hello
After several searches on the sites on VID_12cf&PID_0036
I learned that it would be a Dexin Corp VID USB / 12cf_ driver
on the other hand for the PID there is no correspondence.
Dexin CORP.
ThermalTake.

1 ) Can bluff the software to send the firmware to the mouse ?
2 ) Is it possible to programming a pilot to resuscitate it ?

thanks.


Hi.

  • Did you do any firmware update on the mouse before?
  • Do you by any chance have the wireless receiver or other pointing devices (mice, joystick, controller, touchpad) plugged in?
  • Did you run the fw updater as admin?
  • Do you have Armoury running? If yes, have you tried running the fw updater with armoury disabled/uninstalled?

Galaxis
Level 7
Thank you for answering me.

-- Did you do any firmware update on the mouse before?
Yes
-- Do you by any chance have the wireless receiver or other pointing devices (mice, joystick, controller, touchpad) plugged in?
Yes Dock , keyboard Corsair K95 RG Orion Spectrun , Keyboard G910 Lohitech, mice Sabre RGB Logiteh, ROG Gladius, X52 H.O.T.A Fligth support no touchpad.
-- Did you run the fw updater as admin?
Yes admin and try not admin not progress
-- Do you have Armoury running? If yes, have you tried running the fw updater with armoury disabled/uninstalled?
yes i all try with or without.
i try 1.01.27 > 1.02.26
i try 2.04.06 > 2.06.06
i try 3.00.11 > 3.00.44
or none
the soft update Spatha_Mouse_Fimware_Update_V80 not reponse at bouton
ROG sphata Mouse FW1.62 (Beta) idem no reponse at bouton
The mice Flasing one time at plug wired
it looks like the buttons don't respond
the problem seems to be an internal firmware error that I connect by wire or that I connect the mouse wirelessly to no reaction except a blinking of the mouse, then nothing.
it is detected as a HIDClass 12CF device: 0036
a DEXIN pilot not recognized by Dexin just
USB \ VID_12CF & PID_0036 \ 6 & 27C5ADED & 0 & 7
USB input device.
I tested the battery, it looks intact 4.15v
I also tried the battery disconnection test
but nothing helps.
Box ROG Helios | ROG Thor 1200p
Maximus XII Formula | Cpu I9 10900ka + ROG Ryujin 360
Ram Gskill DDR4 F4-4600C18D 2x8Gb
M.2 980Pro 512G W10_64 | SSD 870 QVO 4T
CG Asus ROG-STRIX-RTX 3080 TI O12G, Asus VG278HR, Benq EL2870U
Logitech K G915 + M G903 + T G Powerplay + H G935

Galaxis wrote:
Thank you for answering me.

-- Did you do any firmware update on the mouse before?
Yes
-- Do you by any chance have the wireless receiver or other pointing devices (mice, joystick, controller, touchpad) plugged in?
Yes Dock , keyboard Corsair K95 RG Orion Spectrun , Keyboard G910 Lohitech, mice Sabre RGB Logiteh, ROG Gladius, X52 H.O.T.A Fligth support no touchpad.
-- Did you run the fw updater as admin?
Yes admin and try not admin not progress
-- Do you have Armoury running? If yes, have you tried running the fw updater with armoury disabled/uninstalled?
yes i all try with or without.
i try 1.01.27 > 1.02.26
i try 2.04.06 > 2.06.06
i try 3.00.11 > 3.00.44
or none
the soft update Spatha_Mouse_Fimware_Update_V80 not reponse at bouton
ROG sphata Mouse FW1.62 (Beta) idem no reponse at bouton
The mice Flasing one time at plug wired
it looks like the buttons don't respond
the problem seems to be an internal firmware error that I connect by wire or that I connect the mouse wirelessly to no reaction except a blinking of the mouse, then nothing.
it is detected as a HIDClass 12CF device: 0036
a DEXIN pilot not recognized by Dexin just
USB \ VID_12CF & PID_0036 \ 6 & 27C5ADED & 0 & 7
USB input device.
I tested the battery, it looks intact 4.15v
I also tried the battery disconnection test
but nothing helps.


OK. Are all those devices plugged in simultaneously (the same time)? I know my computer has problems with USB input being overwhelmed if I connect my controllers, mice and keyboards. Have you tried connecting the spatha without the dock and just one keyboard on wire and one mouse on wire? What about connecting it to another computer or laptop?

Galaxis
Level 7
Hello
Yes, all these devices are connected at the same time.
I tried on a laptop HP and the same symptoms occur.
The same VID 12CF and the PID 0036 REV 4200 are present in the device manager.
the mouse flashes once and these all
really bizzare this VID and PID.
ROG Armory = please insert a device.

Thank you for taking an interest in my problem.

someone to tell me a little when plugging in the wired mouse in right click mode whell and left click at the same time what are the VID & PID in the device manager and the name.
it might help me to create a filter.
Thank you
Box ROG Helios | ROG Thor 1200p
Maximus XII Formula | Cpu I9 10900ka + ROG Ryujin 360
Ram Gskill DDR4 F4-4600C18D 2x8Gb
M.2 980Pro 512G W10_64 | SSD 870 QVO 4T
CG Asus ROG-STRIX-RTX 3080 TI O12G, Asus VG278HR, Benq EL2870U
Logitech K G915 + M G903 + T G Powerplay + H G935

Buenas noches yo tengo el mismo problema
Encontraste alguna solucion ?

Galaxis
Level 7
Hello no alway briked for time.
But i try all possible
Box ROG Helios | ROG Thor 1200p
Maximus XII Formula | Cpu I9 10900ka + ROG Ryujin 360
Ram Gskill DDR4 F4-4600C18D 2x8Gb
M.2 980Pro 512G W10_64 | SSD 870 QVO 4T
CG Asus ROG-STRIX-RTX 3080 TI O12G, Asus VG278HR, Benq EL2870U
Logitech K G915 + M G903 + T G Powerplay + H G935

hola
el otro dia lo desmonte y vi que tiene una eeprom GT 4256 seria cuestion de poder ponerla en un programador y pasarle el firm que tenemos en el programa de actualizacion pero no se que tipo de programador tendria que ser
saludos

[TUTORIAL] REDUCIR EL FIRMWARE DE ROG SPATHA Y DOCK

Busca este hilo en este foro y sigue las instrucciones yo e podido recuperarlo gracias a el cuesta un poco pero yo lo solucione
saludos

Galaxis
Level 7
Hello

Puede estar con este programador :
Programmeur usb BIOS EEPROM CH341A +Clip SOIC8+Adaptateur 1.8V+Adaptateur SOIC8 on ebay
Box ROG Helios | ROG Thor 1200p
Maximus XII Formula | Cpu I9 10900ka + ROG Ryujin 360
Ram Gskill DDR4 F4-4600C18D 2x8Gb
M.2 980Pro 512G W10_64 | SSD 870 QVO 4T
CG Asus ROG-STRIX-RTX 3080 TI O12G, Asus VG278HR, Benq EL2870U
Logitech K G915 + M G903 + T G Powerplay + H G935