Armoury Crate V2.7.8.0 [Report here if any issues]

[MasterC@ROG]

Did you reboot and let Armoury Crate update in the background as mentioned or did you open it after rebooting?

Again, please stop spamming this page.

Btw i rebooted and even waited like 2 hours it did nothing its still broken mess.

[itz_zarz]

The silence is killing me

Mine finally started working, for about 4mins then stopped responding again. I only seems to ever work long enough to get your hopes up just to smack you down again...

Did you reboot and let Armoury Crate update in the background as mentioned or did you open it after rebooting?

Again, please stop spamming this page.

To avoid spamming I'm adding this to my last message, I rebooted and then ran errands for about an hour, it worked, but it was very slow to respond to settings changes and my Claymore was synced in the software but was not lighting up, then about 4-5mins, one song, it against stopped responding. then started give device page errors.

[Arokhantos]

Did you reboot and let Armoury Crate update in the background as mentioned or did you open it after rebooting?

Again, please stop spamming this page.

I don't know what you are expecting but if i did clean install on usb stick it would still be broken even after updating, its not working as intended we need an uninstaller and a proper installer with all the right updates with a pause updates functionality least till everything is figured out and working like it should, with updates being tested before release in future or another option to fall back to previous update to fix things again which auto reports to asus that oh hey another user reverted update there are problems with insert reverted update.

I don't know if your updates are region based and if defiantly seen that updates landed on taiwan page first 2 days before it landed on NL page which is where i am from, so may wanna consider that if that is the case to push updates each region effected by the issues

[MasterC@ROG]

I've started a new thread for the latest version of Armoury Crate. Please post in that thread to clarify exactly is broken after updating. Thanks.

I don't know what you are expecting but if i did clean install on usb stick it would still be broken even after updating, its not working as intended we need an uninstaller and a proper installer with all the right updates with a pause updates functionality least till everything is figured out and working like it should, with updates being tested before release in future or another option to fall back to previous update to fix things again which auto reports to asus that oh hey another user reverted update there are problems with insert reverted update.

I don't know if your updates are region based and if defiantly seen that updates landed on taiwan page first 2 days before it landed on NL page which is where i am from, so may wanna consider that if that is the case to push updates each region effected by the issues

[MasterC@ROG]

A new thread for the latest version V3.0.4.0 is up, please update and report any issues there. Thanks.
https://rog.asus.com/forum/showthrea...084#post811084

This thread is now closed.

[RoninWazza]

Thank you @MasterC@ASUS for the response and the update.

The communication is exactly what was needed and the information provided is helpful and hopeful.

I do have to apologise for the use of the words "it is the appalling customer service".

However, I do ask ASUS that it please recognise that it was said in frustration from the perceived lack of action by ASUS on these issues we have been raising here and in other parts of the broader ROG forum.

We understand that ASUS is a global company and that this forum isn't the only source of information from your user base however I would say that this forum is a pretty good sounding board for what is happening out there in the broader user community.

On the whole, the thing I have noticed about this community is that they are very passionate about ASUS, knowledgeable, provide very good feedback and dedicate plenty of their own time and efforts solving these issues.

So please continue with the communications to the this forum as it is very helpful to know what is happening behind the scenes and that work to resolve these issues continues.

And finally, I would like to say thanks because the most recent updates to the software have resolved my issues. Armoury Crate is now working as intended and I have control over my RGB, fans, etc.

For those out there interested, here is the current software levels:
Item Version
---- -------
Armoury Crate UWP App 3.0.4.0
ROG Live Service 1.1.2.0
AURA Service (Lighting Service) 3.04.15
Armoury Crate lite service 3.0.4
ASUS AIOFan HAL 1.1.11
ASUS AURA Extension Card HAL 1.0.23
ASUS AURA Motherboard HAL 1.0.66
ASUS AURA Odd Component 1.0.8
ASUS Aac_NBDT HAL 2.2.17.0
ASUS Keyboard HAL 1.0.37
ASUS MB Peripheral Products 1.0.33
ASUS Mouse HAL 1.0.39
ASUS MousePad HAL 1.0.1.1
AacAudioHal 1.2.4
AacDispaly 1.1.26
AacVGA 0.0.2.6
CosairDram 1.0.13
KingstonDram 1.0.26
AURA DRAM Component 1.0.48
ENE RGB HAL 1.1.23.0
ENE_DRAM_RGB_AURA42 1.00.02
ENE_EHD_ASM_HAL 1.00.00
ENE_EHD_M2_HAL 1.0.5.0
GALAX GAMER RGB 1.00.02
PHISON HAL 1.0.3.0
Patriot Viper M2 SSD RGB 1.0.5.1
Patriot Viper RGB 1.00.06

Cheers,
Warren

Hi Guys,

After seeing quite a few people here having issues when V3.0.4 launched. I got our guys to stamp out those issues asap. For a brief period, it was safer to keep those who did not update already to remain on the previous version while we sorted out the kinks. V3.0.4 is available again, and you won't need to do anything except reboot then wait for 10-15 min for Armoury Crate to update in the background (speed dependent on your network connection). The new update adds several useful features and tools, features such as exciting new Aura Sync modes, and a new log collection tool so it's less effort for you to provide system config info to us.

Please understand that issues are being reported with your help, but every new update has a schedule. Some of your reported issues may have been replicated, resolved, tested, and implemented in time for the next update, and some won't. If your issue isn't resolved yet in V3.0.4, it doesn't mean that nobody is listening and the fix isn't coming. We are a global brand, and our scope is far larger than this thread and forum. Please do not spam these threads or moderators' inboxes to expedite your own case - we can use our time more efficiently to improving our software (help us help you). As you will find, we have several people checking in and also many experienced individuals in our community who are very helpful (if you don't like what they have to say, at least they spent the time to answer you - please be nice).

This thread will be closed soon when a new one for V3.0.4 is created. Cheers.