Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Apr 2022
    Reputation
    10
    Posts
    1

    Prime Z590 Plus and Corsair Vengeance 3200Mhz settings

    I see in the BIOS that I can up the DRAM frequency to 3200 from the default/auto setting of 2133. Do I need to modify any of the other DRAM settings to insure proper operation? The specs say tested at 1.35 volts, does that imply using that setting? What about timings. The CPU (Intel i711700K) is not overclocked.

  2. #2
    New ROGer Array
    Join Date
    Dec 2021
    Reputation
    23
    Posts
    24

    Can you just turn on XMP1? That should take care of all the memory timing and voltages on it's own. I don't believe you should have to do anything else.
    Then again... I've had so many memory problems that I sure don't feel like an expert.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •