Asus Z490 stuff

[benkey71]

https://www.asus.com/us/Motherboards...Desk_Download/

ROG MAXIMUS XII EXTREME -Beta BIOS 0607
1. Enhance AI Cooling mechanism
just found this up today

[Shamino]

well thats newer, ill just link there

[ttnuagmada]

I cannot find a link to 607 on the Formula web page. Is it for the Extreme only?

[uplink]

I cannot find a link to 607 on the Formula web page. Is it for the Extreme only?

Yup, seems that way. I'm Formula owner too and I still can't get the TB working right

[Zhiyuan Lin]

Can you provide changelogs?

[Kilner]

0607 now avalible for apex on the website ive been havng massive issues with avx currently as soon as enable it with all set voltages still crash yet its stable avx none avx wth teh same voltage dont make sense

[benkey71]

They have put up the 0607 full release to replace the 0607 beta

I have updated from 0607 beta to 0607 full and my system feels more stable.
I'm on MAXIMUS XII EXTREME upgraded from my MAXIMUS X CODE to try the new
Intel chips and all good so far , runs a bit warmer but figured that.

[uplink]

Guys, does Your 10900K boots on either Formula, or Extreme past 4.9 GHz like at all? In HWInfo 64 or somewhere, where You can see it? I'm stuck on max. 4.9 GHz, either all core, or just "few" core, other EIST-ing works fine. I had Formula, changed it for Extreme, still the same results. Is my CPU faulty? Or something? I can overclock it to 5.1 GHz all cores easy, but it heats up a bit, I mean via Ai Overclock. I ran 0606 on Formula and now I'm running 0607 on Extreme.

[Falkentyne]

They have put up the 0607 full release to replace the 0607 beta

I have updated from 0607 beta to 0607 full and my system feels more stable.
I'm on MAXIMUS XII EXTREME upgraded from my MAXIMUS X CODE to try the new
Intel chips and all good so far , runs a bit warmer but figured that.

In what way did your system "feel" more stable? Usually, it is or it isn't
Feel is very subjective. What exactly changed for you, in what way, and what were you having issues with before?
Any specifics? I would guess that 0606 to 0607 should be a minor update with a few fixes, not a major code branch change.

[Kilner]

from my testing 0607 not limits io and sa voltage at 1.05 no matter what you set yet the older bios would drive these past 1.6v auto also somthing changd with vcore vault on 0607 im thinking of going back to 0607 as i can set vcore at 1.47 bios yet in windows shows 1.44 cpuz and my multimeter shows 1.48



0606 shows same vcore in bios as cpuz an multimeter was 0.03v higher

this issue now is the volts are a ta lower on the vcore so you have to bump it up another +5 in the bios for stability and when pushing hard that +5 makes you tip over the edge on heat

im havng an ssue with the rng ratio and my ram if i let ram default an just oc i can have high ring ratio no errors but as soon as i oc my ram i start gettng ring error (cache)

not sure what is going on also my vdroop is really bad on level 5 if im set at 1.47 i drop to 1.325 on load

lvl 8 holds vcore perfect and shows stabale voltage on the multimeter but im not sure if its spiking high due to all th miss information around llc