Page 43 of 63 FirstFirst ... 33 41 42 43 44 45 53 ... LastLast
Results 421 to 430 of 625

Thread: Asus Z490 stuff

  1. #421
    New ROGer Array Braegnok PC Specs
    Braegnok PC Specs
    MotherboardAsus ROG Maximus XII Extreme
    ProcessorIntel Core i9-10900K
    Memory (part number)F4-4000C15Q-32GVK
    Graphics Card #1Nvidia RTX 3090 FE
    MonitorAsus ROG Swift PG32UQX
    Storage #1Samsung 970 Pro
    CPU CoolerOptimus Signature V2
    CaseTT A700 TG
    Power SupplyCorsair AX1600i
    Keyboard Das Keyboard 4 Ultimate
    Mouse G502 Lightspeed
    Headset SteelSeries Arctis Pro
    OS Windows 10 Pro 64-Bit
    Braegnok's Avatar
    Join Date
    Nov 2019
    Reputation
    11
    Posts
    176

    Smile

    I adjusted tRAS from 37 down to 35, and dropped Command Rate to CR1,.. and got some strange results, Read went up nicely, but Write & Copy took a huge hit dropping,.. Latency also dropped to sub 40 ns. Not sure if this is correct direction to go, but Read, and Latency are good to go.

    Click image for larger version. 

Name:	4133 CL17.jpg 
Views:	5 
Size:	172.1 KB 
ID:	87214

    Kind of in a pickle, I need a performance gain in Write & Copy, also want to lower latency a bit more, so going to stick with lowering latency, adjusting tRFC and tREFI.

    Click image for larger version. 

Name:	4133 cr1 39.5.jpg 
Views:	4 
Size:	172.5 KB 
ID:	87213
    Last edited by Braegnok; 12-16-2020 at 10:02 PM.

  2. #422
    ROG Guru: White Belt Array morph. PC Specs
    morph. PC Specs
    Laptop (Model)MacBook Pro 13" i5, Surface Pro X
    MotherboardROG Maximus XII Formula
    Processori9-11900K SP85 @5.4-5.2Ghz
    Memory (part number)G.SKILL F4-3600C14D-32GTRS (2x16) @3733MHz 14-15-15-29
    Graphics Card #1ROG Strix RTX3090oc
    MonitorROG Swift PG279Q
    Storage #1Samsung 970 EVO Plus 1TB NVMe
    CPU CoolerEK Quantum Velocity Nickel Plexi 2x PE360 Radiators
    CaseLian Li PC-O11DXL-W
    Power SupplyCorsair AX1000
    Keyboard SteelSeries Apex Pro
    Mouse Glorious Model O Wireless
    Headset SteelSeries Arctis Pro Wireless
    Mouse Pad ROG Sheath BLK LTD
    OS Windows 10 Pro
    Network RouterBillion BiPAC 8800AXL
    Accessory #1 EK Quantum Vector Strix Waterblock
    Accessory #2 EK Classic Side DP DDC3.2
    Accessory #3 EK Quantum Momentum VRM Bridge
    morph.'s Avatar
    Join Date
    Aug 2017
    Reputation
    16
    Posts
    103

    I don't think you done much in the secondary and tertiary space of timings?

    What did your memory training of RTL/IOL turn out to be?

    As mentioned previously you should use asrock timing configurator to view your timings in windows.

    Your tRAS should be 36=17x2+2

    You should have a read through this: https://github.com/integralfx/MemTes...md#recommended

    This is mine:
    Click image for larger version. 

Name:	unknown.png 
Views:	28 
Size:	400.6 KB 
ID:	87217
    Last edited by morph.; 12-16-2020 at 11:29 PM.

  3. #423
    New ROGer Array Braegnok PC Specs
    Braegnok PC Specs
    MotherboardAsus ROG Maximus XII Extreme
    ProcessorIntel Core i9-10900K
    Memory (part number)F4-4000C15Q-32GVK
    Graphics Card #1Nvidia RTX 3090 FE
    MonitorAsus ROG Swift PG32UQX
    Storage #1Samsung 970 Pro
    CPU CoolerOptimus Signature V2
    CaseTT A700 TG
    Power SupplyCorsair AX1600i
    Keyboard Das Keyboard 4 Ultimate
    Mouse G502 Lightspeed
    Headset SteelSeries Arctis Pro
    OS Windows 10 Pro 64-Bit
    Braegnok's Avatar
    Join Date
    Nov 2019
    Reputation
    11
    Posts
    176

    Thanks Morph, I'm on it. I enjoy reading.

    Edit :
    After reading that link above, and the DDR4 guide by HISEVILNESS,.. I now have a much better approach, understanding for adjusting all timings.

    I started over from scratch, with everything set to Auto, and now have lowered primary timings stable, and working on setting tRFC and tREFI.

    Going to run some MaxxMem2 benchmarks, Prime95 for 4-hours with big custom FFTs.

    Confirming everything is stable, and than start adjusting RTL & IO-L.

    First run with tCL, tRCD, tRP, tRAS stable, working on tRFC & tREFI.

    Click image for larger version. 

Name:	1st run 4133.jpg 
Views:	11 
Size:	166.6 KB 
ID:	87225
    Last edited by Braegnok; 12-17-2020 at 03:29 PM.

  4. #424
    ROG Guru: White Belt Array morph. PC Specs
    morph. PC Specs
    Laptop (Model)MacBook Pro 13" i5, Surface Pro X
    MotherboardROG Maximus XII Formula
    Processori9-11900K SP85 @5.4-5.2Ghz
    Memory (part number)G.SKILL F4-3600C14D-32GTRS (2x16) @3733MHz 14-15-15-29
    Graphics Card #1ROG Strix RTX3090oc
    MonitorROG Swift PG279Q
    Storage #1Samsung 970 EVO Plus 1TB NVMe
    CPU CoolerEK Quantum Velocity Nickel Plexi 2x PE360 Radiators
    CaseLian Li PC-O11DXL-W
    Power SupplyCorsair AX1000
    Keyboard SteelSeries Apex Pro
    Mouse Glorious Model O Wireless
    Headset SteelSeries Arctis Pro Wireless
    Mouse Pad ROG Sheath BLK LTD
    OS Windows 10 Pro
    Network RouterBillion BiPAC 8800AXL
    Accessory #1 EK Quantum Vector Strix Waterblock
    Accessory #2 EK Classic Side DP DDC3.2
    Accessory #3 EK Quantum Momentum VRM Bridge
    morph.'s Avatar
    Join Date
    Aug 2017
    Reputation
    16
    Posts
    103

    ^thats much better once you screw down the RTL/IOL's (not really mentioned how on either of those guides) you should see your latency dip under 40ns.

    Also PPD and TXP are great values to setup to get free latency drops if you haven't already.

    Try to mimic my tertiary values yours still looks very loose there FYI. with 2x8 id be aiming for the 36ns zone.
    Last edited by morph.; 12-17-2020 at 11:18 PM.

  5. #425
    New ROGer Array Braegnok PC Specs
    Braegnok PC Specs
    MotherboardAsus ROG Maximus XII Extreme
    ProcessorIntel Core i9-10900K
    Memory (part number)F4-4000C15Q-32GVK
    Graphics Card #1Nvidia RTX 3090 FE
    MonitorAsus ROG Swift PG32UQX
    Storage #1Samsung 970 Pro
    CPU CoolerOptimus Signature V2
    CaseTT A700 TG
    Power SupplyCorsair AX1600i
    Keyboard Das Keyboard 4 Ultimate
    Mouse G502 Lightspeed
    Headset SteelSeries Arctis Pro
    OS Windows 10 Pro 64-Bit
    Braegnok's Avatar
    Join Date
    Nov 2019
    Reputation
    11
    Posts
    176

    Thanks again for the advice.

    Everything went together smoothly after starting from default settings, and following the proper steps as to which timings to adjust, and in correct order. Does take a bit of time following all the correct steps, but the end results are well worth the time invested.

    I'm running Prime now, about an hour to go,.. than make the RTL/IOL adjustments later tonight, run TM5, Karhu another pass to confirm no errors tomorrow after work. This weekend will look at PPD and TXP, and tighten up tertiary values.

    Thursday Night Football just started, so it's beer thirty.
    Last edited by Braegnok; 12-18-2020 at 02:16 AM.

  6. #426
    New ROGer Array
    Join Date
    Jun 2020
    Reputation
    10
    Posts
    26

    Hello guys.
    Something curious happens to me with my overclock.

    I use a configuration of 5.1 ghz all cores and avx auto, offset +0.015, playing the Vcore Max is 1.275 and a Core Vid approximately 1.30 / 1.31
    Since I have updated to Bios 0901 the Offset is not the same and neither is the Core Vid. I had to increase the Offset to +0.050 to get to the stability of 1.275 before, but now the Core Vid reaches 1.27 / 1.28 from max.

    I have all the other values as I have always used them, does anyone have the same problem?
    Use Rog Z490 Maximus XII

    Best regards





    Last edited by GanjaHouse; 12-18-2020 at 05:26 PM.

  7. #427
    ROG Guru: Green Belt Array geneo PC Specs
    geneo PC Specs
    MotherboardMaximus XII Hero
    Processori9-10900k 5.1Ghz AVX0 @ 1.28v core, delid
    Memory (part number)64 GB G.Skill TridentZ RGB 3200/CL14 @ 3600 CL16
    Graphics Card #1Asus ROG Strix 2070 Super A8G
    MonitorEIZO Coloredge CG2730 and Viewsonic QHD displays
    Storage #1Samsung 512 GB 960 Pro
    Storage #21TB 850 x 1 TB 860 EVO RAID0, 6 TB WDC Black and 6TB IronWolf Pro HDD
    CPU CoolerEK-AIO 360 D-RGB
    CaseFractal Design Meshify 2 dark tint
    Power Supply750W Seasonic Prime Ultra Titanium
    Keyboard CM Quickfire Rapid TKL
    Mouse Logitech G305
    Headset Bose QC15
    Headset/Speakers Vanatoo T1, Klipsch R-12SWi Sub, Bose QC-15
    OS Windows 10 Pro X64
    Network RouterLinksys EA7300
    Accessory #1 Logitech c920e webcam
    geneo's Avatar
    Join Date
    Feb 2014
    Reputation
    40
    Posts
    536

    ^ My guess: newer microcode. Had to raise my core a smidge with my 10700k and new bios. Modded the new BIOS to use the older microcode and could lower it back down again.

  8. #428
    New ROGer Array Braegnok PC Specs
    Braegnok PC Specs
    MotherboardAsus ROG Maximus XII Extreme
    ProcessorIntel Core i9-10900K
    Memory (part number)F4-4000C15Q-32GVK
    Graphics Card #1Nvidia RTX 3090 FE
    MonitorAsus ROG Swift PG32UQX
    Storage #1Samsung 970 Pro
    CPU CoolerOptimus Signature V2
    CaseTT A700 TG
    Power SupplyCorsair AX1600i
    Keyboard Das Keyboard 4 Ultimate
    Mouse G502 Lightspeed
    Headset SteelSeries Arctis Pro
    OS Windows 10 Pro 64-Bit
    Braegnok's Avatar
    Join Date
    Nov 2019
    Reputation
    11
    Posts
    176

    Quote Originally Posted by morph. View Post
    ^thats much better once you screw down the RTL/IOL's (not really mentioned how on either of those guides) you should see your latency dip under 40ns.

    Also PPD and TXP are great values to setup to get free latency drops if you haven't already.

    Try to mimic my tertiary values yours still looks very loose there FYI. with 2x8 id be aiming for the 36ns zone.
    I swapped out the G.SKILL 3600C14 A1 PCB modules yesterday, and testing a Corsair 2x8GB kit.

    Still have a bit of work to do.
    Click image for larger version. 

Name:	Corsair B-Die.jpg 
Views:	11 
Size:	168.3 KB 
ID:	87291
    Last edited by Braegnok; 12-21-2020 at 12:09 PM.

  9. #429
    ROG Guru: White Belt Array morph. PC Specs
    morph. PC Specs
    Laptop (Model)MacBook Pro 13" i5, Surface Pro X
    MotherboardROG Maximus XII Formula
    Processori9-11900K SP85 @5.4-5.2Ghz
    Memory (part number)G.SKILL F4-3600C14D-32GTRS (2x16) @3733MHz 14-15-15-29
    Graphics Card #1ROG Strix RTX3090oc
    MonitorROG Swift PG279Q
    Storage #1Samsung 970 EVO Plus 1TB NVMe
    CPU CoolerEK Quantum Velocity Nickel Plexi 2x PE360 Radiators
    CaseLian Li PC-O11DXL-W
    Power SupplyCorsair AX1000
    Keyboard SteelSeries Apex Pro
    Mouse Glorious Model O Wireless
    Headset SteelSeries Arctis Pro Wireless
    Mouse Pad ROG Sheath BLK LTD
    OS Windows 10 Pro
    Network RouterBillion BiPAC 8800AXL
    Accessory #1 EK Quantum Vector Strix Waterblock
    Accessory #2 EK Classic Side DP DDC3.2
    Accessory #3 EK Quantum Momentum VRM Bridge
    morph.'s Avatar
    Join Date
    Aug 2017
    Reputation
    16
    Posts
    103

    Anyone figure out how to define RTL CHA CHB & IOL CHA CHB?

    Every time I try to put a value in there even mimicking the same as the auto or a value I know works mem training just fails and won't boot.

    For instance, I've been trying to get IOL's to be straight 7's and RTL CHA 61 RTL CHB 62, Running the 901 bios for M12F.

  10. #430
    ROG Member Array
    Join Date
    Jul 2015
    Reputation
    7
    Posts
    6

    Quote Originally Posted by gooper23 View Post
    Has anybody else had issues with the Marvell AQC111C adapter?

    I've been constantly getting connection drops when trying to download large files. Once the download starts, it'll boot me off line a few seconds later. Seems the slower I download, the more delayed the connection drop is. Since switching to the Intel network adapter, I have not had any issues whatsoever.

    Drivers are up to date, tried multiple different BIOS versions but nothing seems to solve this issue. I've found a few posts on this and am rather bummed about this issue.

    https://www.reddit.com/r/ASUS/commen...oard_aquantia/
    https://rog.asus.com/forum/showthrea...G-LAN-Troubles
    https://www.overclock.net/threads/as...blems.1750166/
    YES! I've had to stop using the Marvell Lan. Constant disconnect, random packet loss, it got so bad I called Comcast and they were going to send out a tech. I tried new drivers, old drivers and nothing works. It happened after a recent BIOS or Windows update. Unreal for a motherboard that costs $800. Asus needs to fix this. I am also now using the Intel LAN and no issues.

Page 43 of 63 FirstFirst ... 33 41 42 43 44 45 53 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •