Asus Z490 stuff

[Sahaj]

Dear Asus, shower your blessings upon us Z490-E users and kindly upload a LAN driver for windows 11 on this page.

https://rog.asus.com/motherboards/ro...pdesk_download

[hsm06]

2022/06/10 10.74 MBytes
ROG MAXIMUS XII HERO(WI-FI) BIOS 2601
"1. Improve system performance
2. Improve DRAM compatibility

[geneo]

2022/06/10 10.74 MBytes
ROG MAXIMUS XII HERO(WI-FI) BIOS 2601
"1. Improve system performance
2. Improve DRAM compatibility

Updated from 2403. Seems fine so far.

[kvarq]

not really...

XMP is not a go now for my 2x16 @ 4000 kit
tried the auto voltages when XMP is activated (IO 1.4V and SA 1.5V) also the IO/SA voltages which have been stable using the previous version
on 2403 my 2x16 4000MHz C16 kit (F4-4000C16D-32GTRSA) was stable using 1.28V IO and 1.36V SA

the TPM option is always on no matter if is set off

1003 vs 2403 vs 2601

[geneo]

Try manual setup of 4000 instead of XMP using the XMP values of cas, trcd, tras tfaw, trrd_s/_l

I was running 4000 16-16-34 very with tight timings and 1.17v/1.19v vccio/vccsa on my 2x16 3200CL15 g.skill b-die kit and it carried over as-is.

[kvarq]

or I might roll back to 2403 instead testing everything again
XMP should be XMP, we're not in the Z690 area here =))

yeah, I know, on manual there is a different story though, I remember the 1003/2004 good old days, ran my 2x16 3200C14 (F4-3200C14D-32GTZSK)

for the 4000C16 setting I think I needed 1.45V VRAM and 1.30V SA to pass GSAT overnight

[geneo]

I'd check my other memory settings first. I often forget to enter a setting when upgrading to a new bios. Is the memory OC mode the same for example?
Anyhow, good luck. It is a pita.

[kvarq]

Completely agree
I'm not tuning the memory at all, for daily & gaming I'm just throwing the XMP only and that's it...
AND... I'm quite keen to pass GSAT overnight