Results 1 to 1 of 1
  1. #1
    New ROGer Array
    Join Date
    Nov 2019

    Question GT-AC5300: Device names don't work, only IPs. / Connect via wifi: PC yes, Quest no.


    I connected an unmanaged 16-port switch (Linksys LGS116) and an Asus GT-AC5300 to a cable box from the ISP.

    All LAN devices are connected to the switch. The Asus GT-AC5300 should only be used for WLAN.
    A desktop PC is connected to the switch. But I cannot reach the Asus GT-AC5300 from this PC.
    If I am connected via wifi from the Asus GT-AC5300, then I cannot reach a device at the switch via device name. Only via IP. E.g. the satellite receiver or the NAS.
    I can reach these devices (satellite receiver, NAS ...) with the name, if I am connected to the switch via a LAN cable.
    If I connect via LAN cable, i cannot reach the Asus GT-AC5300 via name or ", and not via IP.
    I can access the Internet if I am connected to the Asus GT-AC5300 via WiFi over the Desktop-PC.
    But I can't connect with a Oculus Quest to this Asus GT-AC5300 Wifi.

    What can I do?
    I also disabled the DHCP of the Asus GT-AC5300.
    So that only the DHCP of the cable box is active.
    The cable box has the IP
    The WAN-IP of the Asus GT-AC5300 is
    The LAN IP of the Asus GT-AC5300 is Why this other IP? I don't want to use the Asus GT-AC5300's LAN ports, but maybe I want to. E.g. for a LAN camera outside. All IPs should be in the same network.
    But this is a secondary problem, first of all the problem mentioned above.
    Last edited by Tobias Claren; 05-25-2020 at 02:41 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts