Z390-E Gaming 4133Mhz ram instability

[qlfenv]

A-Data SPectrix 4133 4x8gb sticks 19-23-23-45 at 1.4v not stable on z390-e gaming.
Changing vccsa vccio doesn't help. Going Dimm voltage up to 1.5 doesn't help so i guess the motherboard is not optimised for this memory.
I settled on 3800 16-16-16-34 at 1.4v vdimm with every subtiming at very very tight values working just fine on 1.25 IO/SA. What can i do to run 4000 or more on this combo? I have a 9900k R0.
Loosening the timings even more than the default xmp profile doesn't do anything so i guess i hit a wall on the motherboard which is weird. this mb can do up to 4266 so there must be some tweaks that i can do to make it work. I only mess with primaries, secondaries, tertiary and some voltages as vccio/vccsa/vdimm. Help please.

UPDATE: It was these settings:
ODT RTT PARK (CHA) [Auto]
ODT RTT PARK (CHB) [Auto
Change them to 40 48 and you're good. There is hope afterall. Your 9900ks might not have a trash IMC and your board might not have to be replaced. Read the thread for more details.

[Enderwiggin03]

Good luck, I have the same board and I couldn't get any higher than 4000mhz with my setup. I honestly think getting the higher frequencies require the exact kits in the QVL.

[qlfenv]

Good luck, I have the same board and I couldn't get any higher than 4000mhz with my setup. I honestly think getting the higher frequencies require the exact kits in the QVL.

BRO!!! I just managed to fix the god damn problem. It's not related to CPU's IMC or wahtever its the ****ing ODT settings(on die termination impedance) found on skew control under dram timings configuration. The motherboard doesn't set that correctly so i configured them manually. There are 6 options so in order i set 80 34 34 80 34 34 (basically the lowest impedance), and it ****ign fixed everything. I'm almost convinced that the qvl memory has these set correctly while non qvl has to be tweaked. I'm running now 4400mhz cl19 on my Z390-E gaming.

UPDATE: i managed to only edit PARK value cuz that has something to do with PROCodt which is the main clock to 40 the rest on auto and everything is perfect. on the first values i posted i had a bit of perf loss.

[Mappi75]

Hello,

did you fix
ODT RTT PARK (CHA) [Auto]
ODT RTT PARK (CHB) [Auto]

Both to 40 - thats all?

[qlfenv]

Hello,

did you fix
ODT RTT PARK (CHA) [Auto]
ODT RTT PARK (CHB) [Auto]

Both to 40 - thats all?

Yea, only the park values need to be tweaked. Theoretically, more of this is might be needed for stability, it's trial and error.
It's ram kit dependant. I set mine to 40. Try what works for your kit, but lower means that the resistance is lower so the signal integrity will be kept.

[Mappi75]

Wow - thank you thats the first time i can boot my 32GB 4.266Mh 17-18-38!

I already tested 5-6 Kits and 2 Maximus XI Extreme Boards and 1x 9900K and 3x9900KS CPU's!

The max what i ever could use was 4.100 16-16-36 and with a second Extreme mobo i can reach 4.133 - GSAT stable!

Now i see the first time booting with the xmp I profile the first time ever!
The funny was 4.300mhz i can boot to without any problems - but it was never GSAT stable.

Thanks for this hint - now i can test if this works GSAT, Memtest Deluxe & Kahru stable.

[qlfenv]

Wow - thank you thats the first time i can boot my 32GB 4.266Mh 17-18-38!

I already tested 5-6 Kits and 2 Maximus XI Extreme Boards and 1x 9900K and 3x9900KS CPU's!

The max what i ever could use was 4.100 16-16-36 and with a second Extreme mobo i can reach 4.133 - GSAT stable!

Now i see the first time booting with the xmp I profile the first time ever!
The funny was 4.300mhz i can boot to without any problems - but it was never GSAT stable.

Thanks for this hint - now i can test if this works GSAT, Memtest Deluxe & Kahru stable.

Nice!

[Enderwiggin03]

Hello,

did you fix
ODT RTT PARK (CHA) [Auto]
ODT RTT PARK (CHB) [Auto]

Both to 40 - thats all?

Tried this, the board wasn't having it, sadly. Back to 4000mhz.

[Mappi75]

I checked my memory but it doesn't run GSAT stable.

Going back to 4.133Mhz 16-16-36

[qlfenv]

Tried this, the board wasn't having it, sadly. Back to 4000mhz.

Keep in mind guys that this is kit dependant. Mine like lower values. Some likes it 0, or off. Some needs 120 or other values. It's trial and error, and it definitely helped me bacause i run my kit at 4400cl19 on a 4266 limited mb.