05-27-2020 06:30 AM - last edited on 03-05-2024 08:01 PM by ROGBot
05-27-2020 08:14 PM
tistou77 wrote:
Hello
No one has managed to use Adaptive Mode with a Cascade Lake-X ?
It would seem that it was very complicated, because of the table of VID too high with this CL-X
Thanks
05-28-2020 12:24 AM
Imperfections wrote:
Well yeah. Of course you can use adaptive with it but it will be too high. Offset within stability margin also won’t help much.
Care to share what is your highest vid at 4.8? Mine went up as high as 1.52 v on worst core which is maximum I guess lol.
05-28-2020 01:25 AM
05-28-2020 01:32 AM
H-de wrote:
adaptive is the only way with manually vcore the vcore always set to maximum even in idle/low-load
hopeful ASUS will fix adaptive voltage and voltage table with cascade lake-x someday, currently i have -0.085 with 4.7GHz, i could even use -0.125 but the system will be unstable in idle/low load
The best way, ASUS let us decrease the turbo voltage, currently we can only increase Turbo Voltage
05-28-2020 01:40 PM
tistou77 wrote:
With Cascade Lake-X, did you manage to use Adaptive Mode (but with a higher value) ?
05-28-2020 02:22 AM
tistou77 wrote:
Really a shame that it does not work, you also use the manual Vcore (fixed) ?
05-28-2020 05:04 AM
05-29-2020 03:26 AM
tistou77 wrote:
Thanks for your feedback 😉
I hesitate to take a 10980XE, but this story of Additive Mode slows me down a bit
Are you at 68° on the hottest core with Cinebench (4800mhz) ?
05-28-2020 02:00 PM