[DRIVERS] Realtek USB Audio (MB | Intel 5xx/6xx/7xx & AMD 5xx/6xx/TRX40)

[xHedgeh0gx]

Hi all!
Z590-F Gaming Wi-Fi
I need help.
I tried all the options with a clean installation of drivers from 1 post in the topic.

As the ability to select spatial sound for devices connected to the back panel did not work, it does not work.

In Windows, the spatial sound selection point is simply not active.

Tested on windows 10 and windows 11.

You can select only on the front panel and DTS and Dolby Atmosphere and others.

Currently there are drivers. (I put everything as it should according to the instructions).

- Realtek USB audio Drivers (UAD-ASUS ROG SS3-DTS MB) :
Drivers: 6.3.9600.2299 WHQL [18/08/2021]

Third-Party Drivers :

SS3|SSVM Extension Driver: 1.3.14.0 WHQL [27/05/2021]
SS3|SSVM VAD Media Driver: 10.38.41.588 WHQL [08/06/2019]
SS3 APO Software Component Driver: 3.3.3.0 WHQL [26/05/2021]
DTS SU Standalone Expansion Driver: 1.7.111.0 WHQL [02/08/2021]- Realtek USB Audio Drivers (UAD-ASUS ROG SS3-DTS MB) :
Drivers: 6.3.9600.2299 WHQL [18/08/2021]

Installation process/Updates :

cleaning

/!\If you already had the Realtek USB audio driver installed, the Realtek Audio remote control/consoles, Sonic Studio III and Sonic Radar III + DTS Sound Unbound/!\
Remove them (Start> Settings > Applications), then restart your computer
- Run the Driver Storage Explorer > Check the boxes for all driver versions that start with .inf (if you find them) :
a-volute | avolute |dts | extrtxusb | hdx | realtek | rtdusbad-a-volute / avolute /dts / extrtxusb/hdx /realtek
- Check the box "Force removal", then click the "Remove driver" button, then restart the computer

set

- Run "Install.cmd" by right-clicking "Run as Administrator" > Automatic restart after installation is complete
- Automatic installation of Realtek Audio Control/console after reboot, if not, install it manually: Link
- Install Sonic Studio III: Link
- Install Sound Radar III (Optional): Link
- Set DTS Sound Unrelated: Link

update

- Run "Install.cmd" by right-clicking "Run as Administrator" > Automatic restart after installation is complete

Note: Realtek Audio Control/The Console + Sonic Studio III and Sonic Radar III + DTS Sound Unbound will be automatically updated through the MS store.

P.S.
The problem was not solved with any drivers.

[Rocket Scientist]

H
As the ability to select spatial sound for devices connected to the back panel did not work, it does not work.

Seems this is "not a bug but feature" coz it's work the same way for Z590 series rear line out without Realtek drivers.

[xHedgeh0gx]

Seems this is "not a bug but feature" coz it's work the same way for Z590 series rear line out without Realtek drivers.

Â*Did I understand correctly? On the Z590 series boards with ALC4080, you can forget about the existence of spatial sound when connected to the back panel....yes?

[MoKiChU]

Hi guys,
I noticed one day that I can't open Realtek Audio Console, Sonic Studio III. So I tried looking online for an answer but nothing could work. I followed the steps here as well for the newer Realtek audio drivers but I get the same message when opening Realtek Audio Console "Can not connect to RPC serivce". The thing is that the sound is working perfectly but it gets on my nerves that it's not working fully, also spatial audio now I can't enable it on my speakers.

Can you guys help me a bit, please?

Hi,

You have an ASUS ROG SS3|DTS Sound Unbound AMD TRX40 motherboard, so :

You need Realtek USB Audio Drivers (UAD - ASUS ROG SS3-DTS TRX40 MB) from the first post of this thread.

Follow scrupulously your CLEANUP process then your INSTALL process, for the next drivers packages that I would release, you will can directly follow your UPDATE process.

Also, to avoid ZoneID blocking trouble :

- For each downloaded .zip : ZoneID unblock the .zip (Right click on the .zip file > Properties > Check the box Unblock > OK).

or

- Disable the ZoneID blocking completely (you will no longer have to unblock each downloaded .zip) :

- Right-click Windows Start button then click Launch then type gpedit.msc > OK
- User Configuration > Administrative Templates > Windows Components > Attachment Manager
- Do not preserve zone information in file attachment : Enabled > OK.

Hi all!
Z590-F Gaming Wi-Fi
I need help.
I tried all the options with a clean installation of drivers from 1 post in the topic.

As the ability to select spatial sound for devices connected to the back panel did not work, it does not work.

In Windows, the spatial sound selection point is simply not active.

Tested on windows 10 and windows 11.

You can select only on the front panel and DTS and Dolby Atmosphere and others.

P.S.
The problem was not solved with any drivers.

Hi,

Check that the Enhance audio/Signal Enhancements setting is enabled (otherwise your audio effects will not work) :

Windows 11

Right click on sound icon tray > Audio settings > Click on your audio output/input devices to enter in their Properties :



Windows 10

Right click on sound icon tray > Sound > Playback/Recording tab > Click on your audio playback/recording devices > Properties > Advanced tab :

[xHedgeh0gx]

Thank you for the detailed answer.
Previously, I used a Gigabyte Z490 Vision G motherboard. I connected regular speakers and Plantronics Rig 400 to 3.5 directly to the motherboard and I could turn on Dolby Atmos without any problems. Now, in the same scenario, when using the Z590-F, it is impossible to select Dolby Atmos as a spatial sound. It's a pity that it doesn't work.

[Exalix]

<edit> delete this..

[Exalix]

Amp/Impedance levelling for headphones found in Realtek Audio Control App does't work with driver 2299.

[tadekm]

noise via those drivers or just cosmetic changes ?

[tadekm]

Ok I will answer to myself Still exist and in my opinion more frequent ...

[Exalix]

Impedance levelling still does't work... When selecting one of the three, nothing happens. Broken since 2299.