Results 1 to 6 of 6
-
06-23-2020 08:24 PM #1
- Join Date
- Nov 2019
- Reputation
- 11
- Posts
- 30
Zephyrus GX701GV - Manual Mode RPM fan issue
Hi guys,
After activating the Manual Mode in Armoury Crate, the minimum RPM of the GPU and CPU fans are 4000 RPM. You can't change this with the sliders, you can only increase RPM fans. The minimum RPM in manual mode is the same as in Turbo Mode and you can not change it. I would like in manual mode the lowest RPM should be about 2000 RPM during idle and about 6000 RPM during maximum load of CPU and GPU. Is it possible? Even if I set the 0% fan speed they are at least 4000 RPM. Why there is no fan curve? My model: GX701GV
Thanks for helpLast edited by Jaroslaw_0; 06-23-2020 at 08:28 PM.
-
07-09-2020 01:47 AM #2
- Join Date
- Feb 2019
- Reputation
- 13
- Posts
- 550
Hello Jaroslaw_0,
May I have the version of your BIOS and Armoury Crate?
I will double confirm with our technical support.
Thank you.
-
07-11-2020 08:52 AM #3
- Join Date
- Nov 2019
- Reputation
- 11
- Posts
- 30
Hello,
Armoury Crate ver: 2.7.13
BIOS ver: 306/307 - the same situation on both
Regards
-
07-17-2020 02:05 AM #4
- Join Date
- Feb 2019
- Reputation
- 13
- Posts
- 550
Hello Jaroslaw_0,
Sorry for my late reply.
I have reported this issue to relate department to double check.
Thank you.
-
07-17-2020 06:46 AM #5
- Join Date
- Nov 2019
- Reputation
- 11
- Posts
- 30
Last edited by Jaroslaw_0; 07-17-2020 at 06:54 AM.
-
07-27-2020 09:20 AM #6
- Join Date
- Feb 2019
- Reputation
- 13
- Posts
- 550
Hello Jaroslaw_0,
I'm sorry that 4000rpm is the lowest for current design.
Your opinion has been taken in to careful consideration for future improvement and adjustment.
Thank you so much.