Rampage VI Extreme Encore and 8 pin

[tistou77]

Hello

By mounting the R6EE, I had recovered an 8pin from the R6E and added another 8 pin
And I forgot to plug the 8pin (coming from the R6E) on the PSU

I plug it in, and after the double boot, I have the message "Check CPU" on the OLED... I had a bit of a strain...
I turn off the PC, unplug this 8 pin, plug in the 6pin instead and it's good

I checked that the 8pin of the R6E was "wired" the same as the R6EE (to be sure) and of course it's the same

What could this be due to ?

Thanks

PS: I did not try to reconnect it and I will try with 8 original pins (the one I have is "sleeved")

[tistou77]

I tested with the original cable and it's good
Not retested with the other cable

[tistou77]

In fact it was not related to the cable, I had another "Check CPU" (1 time)

What is this error ?

Thanks