cancel
Showing results for 
Search instead for 
Did you mean: 

Boot time on Maximus XI Hero / 9900kl

Asryan
Level 10
Hi,

I went back to an Asus Motherboard since two days (maximus hero XI) and I notice that my boot time is longer than I was used to before on an aorus master. 16seconds vs 10seconds.

I know, it's not a big deal at all but i wanted to know how I can improve that.

The W10 install is fresh,I have disabled CSM, secured boot, Fast boot is on in bios (without turbo) and off in windows because I know the PC won't shutdown properly if enabled.

Any ideas?

Thanks
2,111 Views
4 REPLIES 4

Arne_Saknussemm
Level 40
In Boot settings menu there is a delay timer in seconds...often set to 3 seconds default....change that to 0?

Asryan
Level 10
It's set on 1sec now. I don't understand i wasn't used to such slow boot time

I have the same problem. The computer is hanging about 10 seconds at the beginning of post process with fans on full speed. In my previous board, Maximus VII Ranger, the whole boot was 3 seconds!

bass_junkie_xl
Level 11
memory training and memory checking is on default .

under dram timings at the bottom of the page is
"mch full check "
"mrc fast boot"

disabling those ( make sure your ram passes stabilty tests first ) this will be about 8 - 15 seconds less + fast boot on under boot options in bios as well
Rig # 1 - 14900Ks SP-118 | 87 MC @ 6.0 GHZ | 5.2 R | 4.7 E | DDR5 48GB @ 8,600 c36 | Strix RTX 4090 | PG27AQN 1440P 27" 360 Hz G-Sync ULMB 2

Rig # 2 - 14900K-SP-120 | 89 MC @ 5.9 GHZ | 5.2 R | 4.7 E | DDR4 32GB @ 4,300 c15 | Strix RTX 3080 | Aoc 1080P 25" 240 Hz G-Sync