Results 1 to 2 of 2

Threaded View

  1. #1
    New ROGer Array
    Join Date
    Jun 2020

    AURA Service gives random BSOD's

    EDIT: Since this fix is going to take forever I decided to refund min Kingston drive and get another brand, now the problem is gone.

    So I recently got a new computer.

    CPU: AMD Ryzen 5 3600
    Motherboard: ASUS B550-F Gaming
    RAM: G.Skill Trident Z 3600MHz CL16 (16-19-19-39)
    GFX: Asus Rog Strix RTX 2060
    HDD: Kingston A2000 1TB
    PSU: Corsair RM750x

    And after I installed everything I started to get random BSOD's. I looked into the log of windows and found two entries that were repeating:

    1. An error was detected on device \Device\Harddisk6\DR6 during a paging operation. - Source: disk
    2. Reset to device, \Device\RaidPort0, was issued. - Source: stornvme

    I searched high and low what could be wrong with my new harddrive, checked crystal disk info, did a windows check, checked integrity of my windows install, nothing was wrong. I continued to test my ram sticks for several hours, nothing wrong there either.
    I proceeded to update all my drivers through Armoury Crate and it didn't fix my problem.

    Spent hours on google until I found someone who had the same problem, he had uninstalled Aura Service since he found out that Gigabyte RGB Fusion gave the same error on their motherboards. So I tried this and the problems went away, no more entries in windows log, and no more BSOD's.

    I now proceeded to check for updates, I found out that Armoury Crate was far behind so I installed the latest BIOS from Asus homepage, and from AMD the latest chipset drivers. (My GFX always had the latest drivers), checked for updates on my harddrive but there were none.

    Then I reinstalled Armoury Crate and the Aura Service and it didn't take long for the two log entries to come back to haunt me... I then downloaded the lightning control version 1.07.79, removed the Aura Service and installed the older service from folder Lighting_Control_1.07.79\LightingService\, but this still gave me the problems...

    What do I do now?
    I have all this RGB and my computer just sits there all black... Is there any 3rd party program I could use to manage my RGB's?
    Last edited by CusmaR; 07-24-2020 at 11:22 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts