Results 1 to 1 of 1
  1. #1
    New ROGer Array
    Join Date
    Jul 2020

    Angry PRIME B450-PLUS build weird behavior

    Hi Guys!
    My build is
    AMD Ryzen 3600x (1 week old)
    PRIME B450-PLUS (1 week old)
    corsair Vengeance LPX DDR4 (16 x 2) 3200Mhz (SKU CMK8GX4M1E3200C16) (1 week old)
    ASUS GTX 1080 Turbo (about 2 years old)
    Inwin Commander 860 Power supply (about 12 years old)
    Samsung 840 EVO 120GB (about 4 years old running the OS)
    ADATA SU 700 256GB (about 1-year-old with Programs)
    Toshiba DT01ACA300 (about 2 years old)
    Toshiba MQ01ABD100M (about 3years old)
    It was running without any problem for about 4 days but yesterday when I start it, all lights up properly but none of the monitors were getting any signal. I waited about 1 min and then pressed reset and it restarted a few times and then finally showed press F1 to recover bios. then I entered the bios and noticed that the XMP profile is reverted back to normal and other than that, no change. Then when I changed it back to XMP profile and restarted the system. It started normally and without any problem. Then I checked if I missed any bios update and found that one was released on 14th. I installed that and went on with my work for the day.
    today morning also I started the rig, with no such incident.
    but when I start the PC in the evening, again, all lights light up properly without no signal coming to either monitor. I decided to wait this time to see what will happen and after about 10 mins, PC restarted itself and went on to windows 10 without any problem. I checked CPUZ to see if the XMP profile has reverted back to default but found nothing has changed.
    can someone help me to pinpoint my problem?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts