08-09-2020 02:26 PM - last edited on 03-06-2024 10:39 PM by ROGBot
08-11-2020 01:15 PM
InternetOwl wrote:
Just to add another voice to the various others stating the same thing my Strix X570 E hard reboots randomly with the DOCP profile enabled for 3600 RAM. With RAM set to auto (2133) it runs flawlessly. The RAM is on the QVL and prior to the newer bios from 1409 on ran fine with no issues using the XMP profile. I'm sure this is a known issue but thought I'd mention it to add to the list of X570 and X550 boards having the same problems.
08-18-2020 10:12 PM
Fapster wrote:
Hello!
The reason ur RAMs are working good in previous BIOS is that even when u make Auto only settings, it pushing ur VDDC SOC voltage to high! Load the newest BIOS on the support Website and make sure u putting the voltages by hand. I have same mobo.
Put RAM voltage to 1.37 and VDDC SOC voltage to 1.125. make sure ur tRC is matching with the Auto settings of the DOCP, because the BIOS is writing wrong numbers in. F10 and ur good to go. Pls reply if ur system is working without any issue after u made all step by step.
01-02-2022 04:27 PM